End-of-Sale and End-of-Life Announcement for the Cisco Jumpstart Appliance for Cisco Prime Network Registrar 9.0, 9.1, and IP Express

Available Languages

Download Options

  • PDF
    (335.7 KB)
    View with Adobe Reader on a variety of devices
Updated:January 22, 2020

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Available Languages

Download Options

  • PDF
    (335.7 KB)
    View with Adobe Reader on a variety of devices
Updated:January 22, 2020

Table of Contents

 

 

Overview

EOL13312

Cisco announces the end-of-sale and end-of-life dates for the Cisco Jumpstart Appliance for Cisco Prime Network Registrar 9.0, 9.1, and IP Express. The last day to order the affected product(s) is July 20, 2020.Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.

End-of-life milestones

Table 1.        End-of-life milestones and dates for the Cisco Jumpstart Appliance for Cisco Prime Network Registrar 9.0, 9.1, and IP Express

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.

January 20, 2020

End-of-Sale Date:
HW, App SW

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

July 20, 2020

Last Ship Date:
HW, App SW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

October 18, 2020

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

July 20, 2021

End of New Service Attachment Date:
HW, App SW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

July 20, 2021

End of Service Contract Renewal Date:
App SW

The last date to extend or renew a service contract for the product.

October 16, 2022

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

October 15, 2024

Last Date of Support:
App SW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

July 31, 2023

Last Date of Support:
HW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

July 31, 2025

HW = Hardware         OS SW = Operating System Software       App. SW = Application Software

Product part numbers

Table 2.        Product part numbers affected by this announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

ENT-9.1-DD-1K

Prime IP Express DHCP/DNS 9.1 - 1, 000 IP Nodes

There is currently no replacement product available for this product.

-

-

ENT-9.1-DNSCSH

Cisco Prime IP Express 9.1 DNS Caching Server

There is currently no replacement product available for this product.

-

-

ENT-SW-M5-K9

Cisco Prime IP Express Jumstart top level

There is currently no replacement product available for this product.

-

-

PNR-CPU-4110

2.1 GHz 4110/85W 8C/11MB Cache/DDR4 2400MHz

PNR-CPU-I4210

Intel 4210 2.2 GHz/85W 10C/13.75MB DDR4 2400MHz

-

PNR-MR-X16G1RS-H

16GB DDR4-2666-MHz RDIMM/PC4-21300/single rank/x4/1.2v

PNR-MR-X16G1RT-H

16GB DDR4-2666-MHz RDIMM/PC4-21300/single rank/x4/1.2v

-

ENT-DNSCSH-NM-K9

Cisco Prime IP Express DNS Caching Base License - No Media

PNRP100-DCSH-NM-K9

Cisco PNR DNS Caching Server - No Media

-

ENT91-DNS-1KNM-K9

Cisco Prime IP Express DNS v9.1 Base 1, 000 RRs - No Media

PNRP100-DNS-NM-K9

Cisco PNR DNS 10.0 Base - 1000 RRs - No Media

-

PNR91-DHCP-1KNM-K9

Cisco PrimeNetworkRegistrar DHCPv9.1Base1, 000IPnodes-NoMedia

PNRP100-DHCP-NM-K9

Cisco PNR DHCP 10.0 Base - 1000 IP Leases - No Media

-

PNR91-DNS-1KNM-K9

Cisco Prime Network Registrar DNS v9.1 Base 1, 000RRs-NoMedia

PNRP100-DNS-NM-K9

Cisco PNR DNS 10.0 Base - 1000 RRs - No Media

-

ENT-M5-PNTLB

HW Pointer Card and Slam Latch Label

There is currently no replacement product available for this product.

-

-

PNR-DHCPDNS-APL-K9

Network Registrar DHCP/DNS Authoritative Jumpstart Appliance

PNR-10-DD-APL-K9

Network Registrar DHCP/DNS Authoritative Jumpstart Appliance

-

ENT91-DHCP-1KNM-K9

Cisco Prime IP Express DHCP v9.1 Base 1, 000 IPleases-NoMedia

PNRP100-DHCP-NM-K9

Cisco PNR DHCP 10.0 Base - 1000 IP Leases - No Media

-

CPNR-M5-PNTLB

HW Pointer Card and Slam Latch Label

There is currently no replacement product available for this product.

-

-

ENT-PNTLB

HW Pointer Card and Slam Latch Label

There is currently no replacement product available for this product.

-

-

PNR-9.1-DNSCSH

Cisco Prime Network Registrar 9.1 DNS Caching Server

There is currently no replacement product available for this product.

-

-

ENT91-DD-1KNM-K9

Cisco Prime IP Express DHCP/DNS v9.1, Base1K IPnodes-NoMedia

PNRP100-DD-NM-K9

Cisco PNR DHCP/DNS 10.0 Base - 1000 IP Nodes - No Media

-

CVG-MRAID12G-1GB

Cisco 12Gbps SAS 1GB FBWC Cache module (Raid 0/1/5/6)

There is currently no replacement product available for this product.

-

-

CPNR-PNTLB

HW Pointer Card and Slam Latch Label

There is currently no replacement product available for this product.

-

-

CVG-MR-1X162RU-A

16GB DDR4-2133-MHz RDIMM/PC4-17000/single rank/x4/1.2v

There is currently no replacement product available for this product.

-

-

PNR-DNSC-APL-K9

Network Registrar DNS caching Jumpstart Appliance

PNR-10-DCSH-APL-K9

Network Registrar DNS caching Jumpstart Appliance

-

CPNR-SW-M5-K9

Cisco Prime Network Registrar Jumpstart top level

There is currently no replacement product available for this product.

-

-

PNR91-DD-1KNM-K9

CiscoPrimeNetworkRegistrarDHCP/DNSv9.1, Base1KIPnodes-NoMedia

PNRP100-DD-NM-K9

Cisco PNR DHCP/DNS 10.0 Base - 1000 IP Nodes - No Media

-

CVG-HD300G15K12G=

300 GB HD (Spare)

There is currently no replacement product available for this product.

-

-

Product migration options

Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at: https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.

Customers may be able to continue to purchase the Cisco Jumpstart Appliance for Cisco Prime Network Registrar 9.0, 9.1, and IP Express through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: https://www.cisco.com/go/eos.

Service prices for Cisco products are subject to change after the product End-of-Sale date.

The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.

For more information

For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/en/US/products/products_end-of-life_policy.html.

For more information about the Cisco Product Warranties, go to: https://www.cisco.com/en/US/products/prod_warranties_listing.html.

To subscribe to receive end-of-life/end-of-sale information, go to: https://www.cisco.com/cisco/support/notifications.html.

Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.

Learn more