In dem Dokumentationssatz für dieses Produkt wird die Verwendung inklusiver Sprache angestrebt. Für die Zwecke dieses Dokumentationssatzes wird Sprache als „inklusiv“ verstanden, wenn sie keine Diskriminierung aufgrund von Alter, körperlicher und/oder geistiger Behinderung, Geschlechtszugehörigkeit und -identität, ethnischer Identität, sexueller Orientierung, sozioökonomischem Status und Intersektionalität impliziert. Dennoch können in der Dokumentation stilistische Abweichungen von diesem Bemühen auftreten, wenn Text verwendet wird, der in Benutzeroberflächen der Produktsoftware fest codiert ist, auf RFP-Dokumentation basiert oder von einem genannten Drittanbieterprodukt verwendet wird. Hier erfahren Sie mehr darüber, wie Cisco inklusive Sprache verwendet.
Cisco hat dieses Dokument maschinell übersetzen und von einem menschlichen Übersetzer editieren und korrigieren lassen, um unseren Benutzern auf der ganzen Welt Support-Inhalte in ihrer eigenen Sprache zu bieten. Bitte beachten Sie, dass selbst die beste maschinelle Übersetzung nicht so genau ist wie eine von einem professionellen Übersetzer angefertigte. Cisco Systems, Inc. übernimmt keine Haftung für die Richtigkeit dieser Übersetzungen und empfiehlt, immer das englische Originaldokument (siehe bereitgestellter Link) heranzuziehen.
In diesem Dokument wird beschrieben, wie die Layer-2-Hardwareprogrammierung und -weiterleitung auf Catalyst Switches der Serie 9400 validiert wird.
Es gibt keine spezifischen Anforderungen für dieses Dokument.
Die Informationen in diesem Dokument basieren auf dem Switch der Serie Catalyst 9400 (UADP 2.0).
Hinweis: Die in diesem Dokument verwendete Softwareversion ist 16.6.1. Diese Version sollte jedoch auch für spätere Versionen von Cisco IOS-XE gelten.
Hinweis: Sie können dieses Dokument für andere Catalyst Switches der Serie 9000 verwenden, jedoch ignorieren Sie alle Befehle, die auf eine Linecard verweisen.
Die Informationen in diesem Dokument beziehen sich auf Geräte in einer speziell eingerichteten Testumgebung. Alle Geräte, die in diesem Dokument benutzt wurden, begannen mit einer gelöschten (Nichterfüllungs) Konfiguration. Wenn Ihr Netzwerk in Betrieb ist, stellen Sie sicher, dass Sie die möglichen Auswirkungen aller Befehle verstehen.
Abkürzung |
Definition |
RP |
Routingprozessor |
FP |
Forwarding-Prozessor |
FED |
Forwarding Engine-Treiber. Der Softwareprozess, der das Supervisor Forwarding ASIC programmiert. |
Objektmanager |
FP-Software-MAC-Einträge, die als asynchrone Objekte in der Objektdatenbank gespeichert werden. |
LSMPI |
Punt-Schnittstelle für Linux Shared Memory. Der Transport zwischen der Datenebene (Hardware-UADP 2.0) und der Kontrollebene (Software-CPU). |
IFM |
Interface Manager-Softwareprozess. |
IF_ID |
Interface IDentifier ist ein eindeutiger Wert, der eine bestimmte Schnittstelle darstellt. Sie wird während der internen Programmierung im Switch verwendet. |
Einfügen |
Instanz. Gibt an, dass die UADP 2.0-ASIC/Core-Schnittstelle mit folgenden Geräten verbunden ist: 0=ASIC0/Core0, 1=ASIC0/Core1, 2=ASIC1/Core0, 3=ASIC1/Core1, 4=ASIC2/Core0, 5=ASIC2/Core1. |
ASIC |
Gibt an, welcher UADP 2.0 eine Schnittstelle zugeordnet ist: 0=UADP 2.0 #0, 1=UADP 2.0 #1, 2= UADP 2.0 #2. |
Core |
Gibt an, welcher Kern der UADP 2.0-Schnittstelle zugeordnet ist: 0 = core0, 1 = core1. |
Anschluss |
Ordentliche Instanznummer eines Ports innerhalb eines Steckplatzes. Innerhalb desselben Steckplatzes sind alle Portnummern eindeutig. |
SubPort |
Identifiziert einen Port innerhalb einer Portgruppe (Cntx) für Ports an der Vorderseite, die unterportiert sind (Cntx & SubPort zusammen identifizieren einen eindeutigen Port, der unterportiert ist). |
Mac |
Schnittstellenkennung, die bei der Ausführung von MACsec auf einer Schnittstelle verwendet wird (Sicherheitsauthentifizierung und -verschlüsselung). |
CNTX |
Kontext. Eine Gruppennummer, zu der ein Port gehört, wenn eine Schnittstelle an der Vorderseite unterportiert ist (Cntx & SubPort zusammen einen eindeutigen Port identifizieren, der unterportiert ist). |
LPN |
Logische Portnummer, die einer Schnittstelle zugeordnet ist. |
GPN |
Globale Portnummer, die einer Schnittstelle zugeordnet ist. |
NIF eingeben |
Netzwerkschnittstelle; NRU = Netzwerk Redundanter Uplink |
IF_IS |
Interface IDentifier: Dies ist ein eindeutiger Wert, der eine bestimmte Schnittstelle darstellt. Sie wird während der verschiedenen internen Programmierung im Switch verwendet. |
Port_LE |
Logische Einheit des Ports. Dies ist die Schnittstellenkonfiguration. |
AOM |
Asynchroner Objektmanager. Das FP programmiert Informationen als Objekt in die Objektdatenbank. |
VP |
Virtueller Port |
MATM |
MAC-Adresstabelle-Manager |
RP |
Routingprozessor |
OM_PTR |
Objekt-Manager-Zeiger |
Tbl_ID |
Table Identifier = vlan |
CMAN |
Chassis-Manager |
FP |
Forwarding-Prozessor |
fp_port |
Die Ports an der Vorderseite. |
SB |
Stack-Schnittstelle (zu den anderen 2 UADP 2.0-Weiterleitungs-ASICs auf dem Supervisor). |
Nif |
Netzwerkschnittstelle (zur Vorderseite der Oberfläche) |
IGR/EGR |
Eingang/Ausgang |
IQS |
Scheduler für eingehende Warteschlangen |
SQS |
Stack Queue Scheduler |
PBC |
Paketpuffer-Komplex |
AQM |
Aktives Warteschleifenmanagement. Dabei werden Überlastungsmanagement-Prüfungen durchgeführt. |
AQMR |
Active Queue Management Random Early Detection |
EQC |
Egress Queue-Controller |
ESM |
Egress Scheduler Management |
RWE |
Rewrite Engine. Fügt Headerinformationen aus dem Paket hinzu oder löscht diese. |
IOME |
Eingangs-Ausgabemodul-Treiber |
fp_port |
Der Port an der Vorderseite. |
Nif |
Netzwerkschnittstelle (zur Vorderseite der Oberfläche) |
SLI |
System-Link-Schnittstelle (zum Supervisor) |
IGR/EGR = |
Eingang/Ausgang |
AQMR |
Active Queue Management Random Early Detection |
OCI |
Out-of-Band-Steuerungsschnittstelle = interner Kommunikationskanal zwischen der Linecard und dem aktiven Supervisor |
MATM |
MAC-Adresstabelle-Manager |
Anzahl MAC-Verschiebungen |
Dies ist der Zähler für das Verschieben (Erlernen) einer MAC-Adresse auf eine neue Schnittstelle. Die Verschiebungsanzahl kann auftreten, wenn ein End-Host physisch von einer Schnittstelle zur anderen verschoben wird, ein Wireless-Host von einem Access Point (AP) zu einem anderen Access Point, der an einer anderen Schnittstelle verbunden ist, wechselt oder schleift, oder wenn der Spanning-Tree-Pfad geändert wird. |
C9400#show version Cisco IOS XE Software, Version 16.06.01 Cisco IOS Software [Everest], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.6.1, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2017 by Cisco Systems, Inc. Compiled Sat 22-Jul-17 05:51 by mcpre --snip--
C9400#show module Chassis Type: C9407R Mod Ports Card Type Model Serial No. ---+-----+--------------------------------------+--------------+-------------- 1 48 48-Port 10/100/1000 (RJ-45) C9400-LC-48T JAE211703RC 2 48 48-Port UPOE 10/100/1000 (RJ-45) C9400-LC-48U JAE21150CGD 3 10 Supervisor 1 Module C9400-SUP-1 JAE21240235 4 10 Supervisor 1 Module C9400-SUP-1 JAE21240235 5 48 48-Port UPOE 10/100/1000 (RJ-45) C9400-LC-48U JAE21150CG9 Mod MAC addresses Hw Fw Sw Status ---+--------------------------------+----+------------+------------------+-------- 1 E4AA.5D54.C84C to E4AA.5D54.C87B 0.6 16.6.1r [FC 16.06.01 ok 2 E4AA.5D54.B430 to E4AA.5D54.B45F 0.6 16.6.1r [FC 16.06.01 ok 3 2C5A.0F1C.28EC to 2C5A.0F1C.28F5 0.6 16.6.1r [FC 16.06.01 ok 4 2C5A.0F1C.28F6 to 2C5A.0F1C.28FF 0.6 16.6.1r [FC 16.06.01 ok 5 E4AA.5D54.B658 to E4AA.5D54.B687 0.6 16.6.1r [FC 16.06.01 ok Mod Redundancy Role Operating Redundancy Mode Configured Redundancy Mode ---+-------------------+-------------------------+--------------------------- 3 Active sso sso 4 Standby sso sso
C9400#show running-config interface port-channel 1 interface Port-channel1 switchport trunk allowed vlan 100 switchport mode trunk
C9400#show running-config interface gigabitEthernet 1/0/13 interface GigabitEthernet1/0/13 switchport trunk allowed vlan 100 switchport mode trunk channel-group 1 mode active
C9400#show running-config interface gigabitEthernet 5/0/21 interface GigabitEthernet5/0/21 switchport trunk allowed vlan 100 switchport mode trunk channel-group 1 mode active
C9400#show etherchannel summary --snip-- Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------- 1 Po1(SU) LACP Gi1/0/13(P) Gi5/0/21(P)
Anmerkung: Für die Befehle show platform kann es erforderlich sein, dass der interne globale Konfigurationsbefehl des Diensts in die Anweisung aufgenommen wird.
Der Schnittstellenprogrammierbefehl zeigt die Schnittstellenzuordnung auf der Vorderseite für alle Linecards zu einem der drei UADP 2.0-Weiterleitungs-ASICs auf dem aktiven Supervisor an.
Dieses Beispiel zeigt Folgendes:
C9400#show platform software fed active ifm mappings
Interface IF_ID Inst Asic Core Port SubPort Mac Cntx LPN GPN Type Active GigabitEthernet1/0/1 0x7 2 1 0 0 0 4 4 1 101 NIF Y GigabitEthernet1/0/2 0x8 2 1 0 1 1 4 4 2 102 NIF Y --snip-- GigabitEthernet1/0/13 0x13 2 1 0 12 4 0 0 13 1105 NIF Y --snip-- GigabitEthernet5/0/21 0x8f 3 1 1 20 4 5 5 21 1104 NIF Y --snip--
Der Befehl show platform zeigt Softwarekonfigurationsdetails für Gig1/0/3 an, die auf dem IF_ID-Wert des vorherigen Befehlsbeispiels basieren.
C9400#show platform software fed active ifm if-id 0x13 Interface IF_ID : 0x0000000000000013 Interface Name : GigabitEthernet1/0/13 Interface Block Pointer : 0x7fe5c5aab7b8 Interface State : READY Interface Status : ADD, UPD Interface Ref-Cnt : 7 Interface Type : ETHER Port Type : SWITCH PORT Port Location : LOCAL Slot : 1 Unit : 0 Slot Unit : 13 SNMP IF Index : 14 GPN : 1105 EC Channel : 1 EC Index : 1 Port Handle : 0x72000285 LISP v4 Mobility : false LISP v6 Mobility : false QoS Trust Type : 0 Port Information Handle ............ [0x72000285] Type .............. [Layer2] Identifier ........ [0x13] Slot .............. [1] Unit .............. [13] Port Physical Subblock Affinity .......... [local] Asic Instance ..... [2 (A:1,C:0)] AsicPort .......... [12] AsicSubPort ....... [4] MacNum ............ [0] ContextId ......... [0] LPN ............... [13] GPN ............... [113] Speed ............. [1GB] type .............. [NIF] PORT_LE ........... [0x7fe5c5aabc28] L3IF_LE ........... [0x0] EC GPN ............ [1105] EC L3IF_LE ........ [0x0] EC Port Mask ...... [0xaaaaaaaaaaaaaaaa] DI ................ [0x7fe5c5ab5c48] Port L2 Subblock Enabled ............. [Yes] Allow dot1q ......... [Yes] ---> interface Gig1/0/13 is configured as a trunk Allow native ........ [Yes] Default VLAN ........ [1] Allow priority tag ... [Yes] Allow unknown unicast [Yes] Allow unknown multicast[Yes] Allow unknown broadcast[Yes] Allow unknown multicast[Enabled] Allow unknown unicast [Enabled] IPv4 ARP snoop ....... [No] IPv6 ARP snoop ....... [No] Jumbo MTU ............ [1500] Learning Mode ........ [1] Port QoS Subblock Trust Type .................... [0x2] Default Value ................. [0] Ingress Table Map ............. [0x0] Egress Table Map .............. [0x0] Queue Map ..................... [0x0] Port Netflow Subblock Port Policy Subblock List of Ingress Policies attached to an interface List of Egress Policies attached to an interface Ref Count : 7 (feature Ref Counts + 1) IFM Feature Ref Counts FID : 100, Ref Count : 1 FID : 57, Ref Count : 1 FID : 115, Ref Count : 1 FID : 17, Ref Count : 1 FID : 78, Ref Count : 1 FID : 30, Ref Count : 1 IFM Feature Sub block information FID : 57, Private Data : 0x7fe5c685e748 FID : 17, Private Data : 0x7fe5c5e85f38 FID : 30, Private Data : 0x7fe5c5e85aa8
Mit diesem Befehl werden die Hardwarekonfigurationsdetails für Gig1/0/3 basierend auf dem Wert PORT_LE des vorherigen Befehls angezeigt.
Wert |
Definition |
Wert 0 |
Der Wert ist nicht festgelegt. |
Wert 1 |
Der in den meisten Fällen festgelegte Wert. |
C9400#show platform hardware fed active fwd-asic abstraction print-resource-handle 0x7fe5c5aabc28 1 Handle:0x7fe5c5aabc28 Res-Type:ASIC_RSC_PORT_LE Res-Switch-Num:0 Asic-Num:2 Feature-ID:AL_FID_IFM Lkp-ftr-id:LKP_FEAT_INGRESS_PRECLASS1_IPV4 ref_count:1 priv_ri/priv_si Handle: (nil)Hardware Indices/Handles: index2:0xc mtu_index/l3u_ri_index2:0x4 sm handle [ASIC 2]: 0x7fe5c5abb588 Detailed Resource Information (ASIC#2) ----------------------------------------
LEAD_PORT_ALLOW_BROADCAST value 1 Pass LEAD_PORT_ALLOW_CAPWAP value 0 Pass LEAD_PORT_ALLOW_CTS value 0 Pass LEAD_PORT_ALLOW_DOT1Q_TAGGED value 1 Pass LEAD_PORT_ALLOW_MULTICAST value 1 Pass LEAD_PORT_ALLOW_NATIVE value 1 Pass LEAD_PORT_ALLOW_NON_CTS value 0 Pass LEAD_PORT_ALLOW_PRIORITY_TAGGED value 1 Pass LEAD_PORT_ALLOW_UNICAST value 1 Pass LEAD_PORT_ALLOW_UNKNOWN_ETHER_TYPE value 0 Pass LEAD_PORT_ALLOW_UNKNOWN_UNICAST value 1 Pass LEAD_PORT_ALLOW_VLAN_LOAD_BALANCE_GROUP value 15 Pass LEAD_PORT_ALLOW_VRF value 0 Pass LEAD_PORT_ARP_OR_ND_SNOOPING_ENABLED_IPV4 value 0 Pass LEAD_PORT_ARP_OR_ND_SNOOPING_ENABLED_IPV6 value 0 Pass LEAD_PORT_AUTH_MODE value 0 Pass LEAD_PORT_CAPWAP_TUNNEL value 0 Pass LEAD_PORT_CONTENT_MATCHING_ENABLED value 0 Pass LEAD_PORT_CTS_ENABLED value 0 Pass LEAD_PORT_CUSTOMER_PORT value 0 Pass LEAD_PORT_DAI_OR_ND_TRUST_MODE_IPV4 value 0 Pass LEAD_PORT_DAI_OR_ND_TRUST_MODE_IPV6 value 0 Pass LEAD_PORT_DATA_GLEAN_LEARN_IPV4 value 0 Pass --snip--
In diesen EtherChannel-Programmausgängen programmiert der RP das FP, der FP programmiert die FED, der FED programmiert dann die Weiterleitung der ASIC-Hardware durch den Supervisor. RP-Softwareeinträge werden als Objekte in der Objektdatenbank gespeichert, und die FP-Softwareeinträge werden als asynchrone Objekte in der Objektdatenbank gespeichert.
C9400#show etherchannel summary --snip-- Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------- 1 Po1(SU) LACP Gi1/0/13(P) Gi5/0/21(P)
Die Gruppenmaske ist eine Nicht-Null in dieser Ausgabe. Sie wird im Hashprozess verwendet, um die Verbindung im Etherchannel zu ermitteln, über die ein Datenverkehrsfluss ausgeht.
C9400#show platform software interface rp active brief Forwarding Manager Interfaces Information Name ID QFP ID ------------------------------------------------------------- Null0 1 0 GigabitEthernet1/0/1 7 0 GigabitEthernet1/0/2 8 0 GigabitEthernet1/0/3 9 0 —snip— GigabitEthernet1/0/13 19 0 —snip— GigabitEthernet5/0/21 143 0 —snip— Port-channel1 748 0 —snip—
C9400#show platform software fed active etherchannel 1 group-mask Group Mask Info Aggport IIF Id: 00000000000002EC ---> hex 0x2EC = dec 748 Active Port: : 2 -------------------> 2 active interfaces in the etherchannel = the Member ports below Member Ports If Name If Id local Group Mask ------------------------------------------------------------------- GigabitEthernet1/0/13 0000000000000013 true 5555555555555555 ---> hex 0x13 = dec 19 GigabitEthernet5/0/21 000000000000008f true aaaaaaaaaaaaaaaa ---> hex 0x8f = dec 143
Dieser Befehl zeigt die Konfiguration für Port-Channel 1 an:
C9400#show platform software fed active ifm if-id 0x000002ec Interface IF_ID : 0x00000000000002ec Interface Name : Port-channel1 Interface Block Pointer : 0x7fe5c685df98 Interface State : READY Interface Status : ADD, UPD Interface Ref-Cnt : 5 Interface Type : ETHERCHANNEL Port Type : SWITCH PORT Channel Number : 1 SNMP IF Index : 720 Port Handle : 0x50002f6 #Of Active Ports : 2 Base GPN : 1104 Index[2] : 0000000000000013 ---> Gig1/0/13 from previous command output Index[3] : 000000000000008f ---> Gig5/0/21 from previous command output Port Information Handle ............ [0x50002f6] Type .............. [L2-Ethchannel] Identifier ........ [0x2ec] Unit .............. [1] Port Logical Subblock L3IF_LE handle .... [0x0] Num physical port . [2] GPN Base .......... [1104] Num physical port on asic [0] is [0] DiBcam handle on asic [0].... [0x0] Num physical port on asic [1] is [0] DiBcam handle on asic [1].... [0x0] Num physical port on asic [2] is [1] ------------> Gig1/0/13 is on ASIC instance 2 (Supervisor ASIC 1, core 0) DiBcam handle on asic [2].... [0x7fe5c6ae3608] Num physical port on asic [3] is [1] ------------> Gig5/0/21 is on ASIC instance 3 (Supervisor ASIC 1, core 1) DiBcam handle on asic [3].... [0x7fe5c685d7e8] Num physical port on asic [4] is [0] DiBcam handle on asic [4].... [0x0] Num physical port on asic [5] is [0] DiBcam handle on asic [5].... [0x0] Port L2 Subblock Enabled ............. [No] Allow dot1q ......... [No] Allow native ........ [No] Default VLAN ........ [0] Allow priority tag ... [No] Allow unknown unicast [No] Allow unknown multicast[No] Allow unknown broadcast[No] Allow unknown multicast[Enabled] Allow unknown unicast [Enabled] IPv4 ARP snoop ....... [No] IPv6 ARP snoop ....... [No] Jumbo MTU ............ [0] Learning Mode ........ [0] Port QoS Subblock Trust Type .................... [0x7] Default Value ................. [0] Ingress Table Map ............. [0x0] Egress Table Map .............. [0x0] Queue Map ..................... [0x0] Port Netflow Subblock Port Policy Subblock List of Ingress Policies attached to an interface List of Egress Policies attached to an interface Ref Count : 5 (feature Ref Counts + 1) IFM Feature Ref Counts FID : 115, Ref Count : 1 FID : 78, Ref Count : 1 No Sub Blocks Present
Dieser Befehl zeigt die Konfiguration für Zuordnungsschnittstellen an.
Akronym/Instanz |
Definition |
IFM |
Schnittstellenmanager |
Instanz |
Gig1/0/13 befindet sich auf ASIC-Instanz 2 (UADP 2.0 ASIC 1, Core 0) mit Schnittstelle-ID 0x13 |
Instanz |
Gig5/0/21 befindet sich auf ASIC-Instanz 3 (UADP 2.0 ASIC 1, Core 1) mit Schnittstelle-ID 0x8f |
C9400#show platform software fed active ifm mappings
Interface IF_ID Inst Asic Core Port SubPort Mac Cntx LPN GPN Type Active GigabitEthernet1/0/1 0x7 2 1 0 0 0 4 4 1 101 NIF Y GigabitEthernet1/0/2 0x8 2 1 0 1 1 4 4 2 102 NIF Y --snip-- GigabitEthernet1/0/13 0x13 2 1 0 12 4 0 0 13 1105 NIF Y --snip-- GigabitEthernet5/0/21 0x8f 3 1 1 20 4 5 5 21 1104 NIF Y --snip--
C9400#show platform software ether-channel rp active global-config Forwarding Manager EtherChannel Global Configuration Information Frame Dist Method: Dest-IP-Address ---> distribution (hash) method: a packet's destination IP address is used to determine which etherchannel member link it is sent out on
C9400#show platform software ether-channel fp active global-config Forwarding Manager EtherChannel Global Configuration Information Frame Dist Method: Dest-IP-Address AOM ID: 27 Status: Done ----------------> Programming in hardware is complete (FP received acknowledgement from FED)
C9400#show platform software object-manager fp active object 27 Object identifier: 27 Description: EtherChannel global configuration object Status: Done, Epoch: 0, Client data: 0x792e6e28
C9400#show platform software fed active vlan 100 VLAN Fed Information Vlan Id IF Id LE Handle STP Handle L3 IF Handle SVI IF ID MVID --------------------------------------------------------------------------------------------------------------- 100 0x0000000000420011 0x00007fe5c4616ef8 0x00007fe5c4617778 0x00007fe5c50dac28 0x00000000000002ea 10
Dieser Befehl zeigt Details zur Hardwarekonfiguration für VLAN 100 an.
Wert |
Definition |
Wert 0 |
Der Wert ist nicht festgelegt. |
Wert 1 |
Der in den meisten Fällen festgelegte Wert. |
C9400#show platform hardware fed active fwd-asic abstraction print-resource-handle 0x00007fe5c4616ef8 1 Handle:0x7fe5c4616ef8 Res-Type:ASIC_RSC_VLAN_LE Res-Switch-Num:255 Asic-Num:255 Feature-ID:AL_FID_L2 Lkp-ftr-id:LKP_FEAT_INVALID ref_count:1 priv_ri/priv_si Handle: (nil)Hardware Indices/Handles: index0:0xa mtu_index/l3u_ri_index0:0x0 sm handle [ASIC 0]: 0x7fe5c461c1d8 index1:0xa mtu_index/l3u_ri_index1:0x0 sm handle [ASIC 1]: 0x7fe5c461d688 index2:0xa mtu_index/l3u_ri_index2:0x0 sm handle [ASIC 2]: 0x7fe5c461eb38 index3:0xa mtu_index/l3u_ri_index3:0x0 index4:0xa mtu_index/l3u_ri_index4:0x0 index5:0xa mtu_index/l3u_ri_index5:0x0 Cookie length: 56 00 00 00 00 00 00 00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Detailed Resource Information (ASIC#0) ---> ASIC instance 0 = Supervisor ASIC 0, core 0 --snip-- Detailed Resource Information (ASIC#1) ---> ASIC instance 1 = Supervisor ASIC 0, core 1 --snip-- Detailed Resource Information (ASIC#2) ---> ASIC instance 2 = Supervisor ASIC 1, core 0 ---------------------------------------- LEAD_VLAN_ALLOW_SNOOPING_IGMP_OR_MLD_IPV4 value 0 Pass LEAD_VLAN_ALLOW_SNOOPING_IGMP_OR_MLD_IPV6 value 0 Pass LEAD_VLAN_ARP_OR_ND_SNOOPING_ENABLED_IPV4 value 0 Pass LEAD_VLAN_ARP_OR_ND_SNOOPING_ENABLED_IPV6 value 0 Pass LEAD_VLAN_BLOCK_L2_LEARN value 0 Pass LEAD_VLAN_CONTENT_MATCHING_ENABLED value 0 Pass LEAD_VLAN_DEST_MOD_INDEX_TVLAN_LE value 0 Pass LEAD_VLAN_DHCP_SNOOPING_ENABLED_IPV4 value 0 Pass LEAD_VLAN_DHCP_SNOOPING_ENABLED_IPV6 value 0 Pass LEAD_VLAN_ENABLE_SECURE_VLAN_LEARNING_IPV4 value 0 Pass LEAD_VLAN_ENABLE_SECURE_VLAN_LEARNING_IPV6 value 0 Pass LEAD_VLAN_EPOCH value 0 Pass LEAD_VLAN_L2_PROCESSING_STP_TCN value 0 Pass LEAD_VLAN_L2FORWARD_IPV4_MULTICAST_PKT value 0 Pass LEAD_VLAN_L2FORWARD_IPV6_MULTICAST_PKT value 0 Pass LEAD_VLAN_L3_IF_LE_INDEX_PRIO value 1 Pass LEAD_VLAN_L3IF_LE_INDEX value 111 Pass LEAD_VLAN_LOOKUP_VLAN value 10 Pass ------------> MVID 10 = vlan 100 LEAD_VLAN_MCAST_LOOKUP_VLAN value 10 Pass LEAD_VLAN_RIET_OFFSET value 1 Pass LEAD_VLAN_SNOOPING_FLOODING_ENABLED_IGMP_OR_MLD_IPV4 value 0 Pass LEAD_VLAN_SNOOPING_FLOODING_ENABLED_IGMP_OR_MLD_IPV6 value 1 Pass LEAD_VLAN_SNOOPING_PROCESSING_STP_TCN_IGMP_OR_MLD_IPV4 value 0 Pass LEAD_VLAN_SNOOPING_PROCESSING_STP_TCN_IGMP_OR_MLD_IPV6 value 0 Pass LEAD_VLAN_VLAN_CLIENT_LABEL value 0 Pass LEAD_VLAN_VLAN_CONFIG value 0 Pass LEAD_VLAN_VLAN_FLOOD_ENABLED value 0 Pass LEAD_VLAN_VLAN_ID_VALID value 1 Pass LEAD_VLAN_VLAN_LOAD_BALANCE_GROUP value 15 Pass LEAD_VLAN_VLAN_ROLE value 0 Pass LEAD_VLAN_VLAN_FLOOD_MODE_BITS value 3 Pass LEAD_VLAN_LVX_VLAN value 0 Pass LEAD_VLAN_EGRESS_DEJAVU_CANON value 0 Pass LEAD_VLAN_EGRESS_INGRESS_VLAN_MODE value 0 Pass LEAD_VLAN_EGRESS_LOOKUP_VLAN value 0 Pass LEAD_VLAN_EGRESS_SGACL_DISABLED value 3 Pass LEAD_VLAN_EGRESS_VLAN_CLIENT_LABEL value 0 Pass LEAD_VLAN_EGRESS_VLAN_ID_VALID value 1 Pass LEAD_VLAN_EGRESS_VLAN_LOAD_BALANCE_GROUP value 15 Pass LEAD_VLAN_EGRESS_INTRA_POD_BCAST value 0 Pass LEAD_VLAN_EGRESS_INTER_POD_BCAST value 0 Pass LEAD_VLAN_MAX value 0 Pass Detailed Resource Information (ASIC#3) ---> ASIC instance 3 = Supervisor ASIC 1, core 1 --snip-- Detailed Resource Information (ASIC#4) ---> ASIC instance 4 = Supervisor ASIC 2, core 0 --snip- Detailed Resource Information (ASIC#5) ---> ASIC instance 5 = Supervisor ASIC 2, core 1 --snip--
C9400#show spanning-tree vlan 100
VLAN0100
Spanning tree enabled protocol rstp Root ID Priority 32868 Address 20bb.c05e.5300 Cost 4 Port 2473 (Port-channel1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32868 (priority 32768 sys-id-ext 100) Address 2c5a.0f1c.28c0 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Gi1/0/1 Desg FWD 19 128.1 Shr Gi2/0/11 Desg FWD 4 128.107 P2p Po1 Root FWD 3 128.2473 P2p Peer(STP)
C9400#show etherchannel summary --snip-- Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------- 1 Po1(SU) LACP Gi1/0/13(P) Gi5/0/21(P)
Diese Befehle zeigen den Spanning Tree-Weiterleitungsstatus für Port-Channel 1 an.
C9400#show platform software interface rp active brief Forwarding Manager Interfaces Information Name ID QFP ID ------------------------------------------------------------- Null0 1 0 GigabitEthernet1/0/1 7 0 GigabitEthernet1/0/2 8 0 GigabitEthernet1/0/3 9 0 —snip— Port-channel1 748 0 —snip—
C9400#show platform software fed active vp summary interface if_id 748 if_id vlan_id pvlan_mode pvlan_vlan stp_state vtp pruned Untagged ------------------------------------------------------------------------------------------------- 748 100 trunk 1 forwarding No No
Die folgenden Befehle zeigen den Spanning Tree-Hardware-Weiterleitungsstatus für VLAN 100 an.
C9400#show platform software fed active vp summary vlan 100 if_id vlan_id pvlan_mode pvlan_vlan stp_state vtp pruned Untagged ------------------------------------------------------------------------------------------------- --snip-- 748 100 trunk 1 forwarding No No --snip--
C9400#show platform hardware fed active vlan 100 ingress VLAN STP State in hardware vlan id is:: 100 Interfaces in forwarding state: : Gi2/0/11(Tagged), Gi1/0/1(Tagged), Gi1/0/13(Tagged), Gi5/0/21(Tagged) flood list: : Gi2/0/11, Gi1/0/1, Gi1/0/13, Gi5/0/21
C9400#show platform hardware fed active vlan 100 egress VLAN STP State in hardware vlan id is:: 100 Interfaces in forwarding state: : Gi2/0/11(Tagged), Gi1/0/1(Tagged), Gi1/0/13(Tagged), Gi5/0/21(Tagged)
Überprüfen Sie die Spanning-Tree-Stabilität. Stellen Sie sicher, dass die Benachrichtigungen zu Topologieänderungen (TCN) selten angezeigt werden.
C9400#show spanning-tree vlan 100 detail VLAN0100 is executing the rstp compatible Spanning Tree protocol Bridge Identifier has priority 32768, sysid 10, address 2c5a.0f1c.28c0 Configured hello time 2, max age 20, forward delay 15, transmit hold-count 6 Current root has priority 32868, address 2c5a.0f1c.5300 Root port is 2473 (Port-channel1), cost of root path is 4 Topology change flag not set, detected flag not set Number of topology changes 1 last change occurred 2w6d ago from Port-channel1 Times: hold 1, topology change 35, notification 2 hello 2, max age 20, forward delay 15 Timers: hello 0, topology change 0, notification 0, aging 300
--snip--
C9400#show etherchannel summary --snip-- Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------- 1 Po1(SU) LACP Gi1/0/13(P) Gi5/0/21(P)
C9400#ping 100.100.900.53 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 100.100.900.53, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 3/4/5 ms
C9400#show mac address-table dynamic vlan 100 Mac Address Table ------------------------------------------- Vlan Mac Address Type Ports ---- ----------- -------- ----- 100 0000.0200.0800 DYNAMIC Gi1/0/1 100 20bb.c05e.5318 DYNAMIC Po1 100 20bb.c05e.5351 DYNAMIC Po1 Total Mac Addresses for this criterion: 3
In den nächsten Ausgabebeispielen programmiert das RP das FP, das FP programmiert die FED, und schließlich programmiert die FED die Weiterleitung der ASIC-Hardware durch den Supervisor. MAC-Einträge der RP-Software werden als Objekte in der Objektdatenbank gespeichert, und die MAC-Einträge der FP-Software werden als asynchrone Objekte in der Objektdatenbank gespeichert.
C9400#show platform software matm rp active mac 20bb.c05e.5351 1 100 ---> 100 = vlan Tbl_Type Tbl_ID MAC_Address Type Ports AOM_ID/OM_PTR MAT_VLAN 100 20bb.c05e.5351 1 1 OM: 0x3700860010
List of Ports: 748
C9400#show platform software interface rp active brief Forwarding Manager Interfaces Information Name ID QFP ID ------------------------------------------------------------- Null0 1 0 GigabitEthernet1/0/1 7 0 GigabitEthernet1/0/2 8 0 GigabitEthernet1/0/3 9 0 —snip— Port-channel1 748 0 —snip—
C9400#show platform software matm fp active mac 20bb.c05e.5351 Tbl_Type Tbl_ID MAC_Address Type Ports AOM_ID/OM_PTR MAT_VLAN 100 20bb.c05e.5351 1 1 6567 created List of Ports: 748
C9400#show platform software object-manager fp active object 6567 Object identifier: 6567 Description: matm mac entry type VLAN, id 100, 20bb.c05e.5351
Status: Done, Epoch: 0, Client data: 0x799633f8
C9400#show platform software fed active matm macTable vlan 100
VLAN MAC Type Seq# macHandle siHandle diHandle *a_time *e_time ports 100 2c5a.0f1c.28e1 0X8002 0 0x7fe5c5eaf1c8 0x7fe5c5924f38 0x0 0 0 Vlan100 100 20bb.c05e.5351 0X1 589 0x7fe5c6b03d68 0x7fe5c6865f78 0x7fe51001b458 300 1 Port-channel1 100 0000.0200.0800 0X1 610 0x7fe5c6b07888 0x7fe5c6b076e8 0x7fe5c5972ce8 300 1 GigabitEthernet1/0/1 Total Mac number of addresses:: 3 *a_time=aging_time(secs) *e_time=total_elapsed_time(secs) Type: MAT_DYNAMIC_ADDR 0x1 MAT_STATIC_ADDR 0x2 ---> Type = dynamically learned MAC address entry MAT_CPU_ADDR 0x4 MAT_DISCARD_ADDR 0x8 MAT_ALL_VLANS 0x10 MAT_NO_FORWARD 0x20 MAT_IPMULT_ADDR 0x40 MAT_RESYNC 0x80 MAT_DO_NOT_AGE 0x100 MAT_SECURE_ADDR 0x200 MAT_NO_PORT 0x400 MAT_DROP_ADDR 0x800 MAT_DUP_ADDR 0x1000 MAT_NULL_DESTINATION 0x2000 MAT_DOT1X_ADDR 0x4000 MAT_ROUTER_ADDR 0x8000 MAT_WIRELESS_ADDR 0x10000 MAT_SECURE_CFG_ADDR 0x20000 MAT_OPQ_DATA_PRESENT 0x40000 MAT_WIRED_TUNNEL_ADDR 0x80000 MAT_DLR_ADDR 0x100000 MAT_MRP_ADDR 0x200000 MAT_MSRP_ADDR 0x400000 MAT_LISP_LOCAL_ADDR 0x800000 MAT_LISP_REMOTE_ADDR 0x1000000 MAT_VPLS_ADDR 0x2000000
Abkürzung/Begriff |
Definition |
VLAN:10 |
MVID 10. VLAN 100 verwendet intern im Switch die zugeordnete VLAN-ID (MVID) 10. |
GPN:1104 |
Globale Portnummer von Port-Channel 1. |
MAC:0 x 20 bbc05e5351 |
MAC-Adresse 20bb.c05e.5351 |
Dies ist ein Beispiel für die macHandle-Programmierung:
C9400#show platform hardware fed active fwd-asic abstraction print-resource-handle 0x7fe5c6b03d68 1 Handle:0x7fe5c6b03d68 Res-Type:ASIC_RSC_HASH_TCAM Res-Switch-Num:0 Asic-Num:255 Feature-ID:AL_FID_L2 Lkp-ftr-id:LKP_FEAT_L2_SRC_MAC_VLAN ref_count:1 priv_ri/priv_si Handle: (nil)Hardware Indices/Handles: handle [ASIC: 0]: 0x7fe5c6aed898 handle [ASIC: 1]: 0x7fe5c6b00fd8 handle [ASIC: 2]: 0x7fe5c6858208 Features sharing this resource:Cookie length: 12 5e c0 bb 20 51 53 0a 80 07 00 00 00 Detailed Resource Information (ASIC#0) ---------------------------------------- Number of HTM Entries: 1
Entry 0: (handle 0x7fe5c6aed898) Abs_hash_index: 294 KEY - vlan:10 mac:0x20bbc05e5351 l3_if:0 gpn:1104 epoch:0 static:0 flood_en: 0 vlan_lead_wless_flood_en: 0 client_home_asic: 0 MASK - vlan:0 mac:0x0 l3_if:0 gpn:0 epoch:0 static:0 flood_en:0 vlan_lead_wless_flood_en: 0 client_home_asic: 0 SRC_AD - need_to_learn:0 lrn_v:0 catchall:0 static_mac:0 chain_ptr_v:0 chain_ptr: 0 static_entry_v:0 auth_state:0 auth_mode:0 auth_behavior_tag:0 traf_m:0 is_src_ce:0 DST_AD - si:0xcd bridge:0 replicate:0 blk_fwd_o:0 v4_rmac:0 v6_rmac:0 catchall:0 ign_src_lrn:0 port_mask_o:0 afd_cli_f:0 afd_lbl:0 prio:3 dest_mod_idx:0 destined_to_us:0 pv_trunk:1 smr:0 Detailed Resource Information (ASIC#1) --snip-- Detailed Resource Information (ASIC#2) --snip--
C9400#show platform software fed active vlan 100 VLAN Fed Information Vlan Id IF Id LE Handle STP Handle L3 IF Handle SVI IF ID MVID --------------------------------------------------------------------------------------------------------------- 100 0x0000000000420011 0x00007fe5c4616ef8 0x00007fe5c4617778 0x00007fe5c50dac28 0x00000000000002ea 10
C9400#show platform software fed active ifm mappings etherchannel Mappings Table Chan Interface IF_ID ---------------------------------------------------- 1 Port-channel1 0x000002ec --snip--
C9400#show platform software fed active ifm if-id 0x000002ec <-- IF_ID from previous output Interface IF_ID : 0x00000000000002ec Interface Name : Port-channel1 Interface Block Pointer : 0x7fe5c685df98 Interface State : READY Interface Status : ADD, UPD Interface Ref-Cnt : 5 Interface Type : ETHERCHANNEL Port Type : SWITCH PORT Channel Number : 1 SNMP IF Index : 720 Port Handle : 0x50002f6 #Of Active Ports : 2 Base GPN : 1104 Index[2] : 0000000000000013 Index[3] : 000000000000008f Port Information Handle ............ [0x50002f6] Type .............. [L2-Ethchannel] Identifier ........ [0x2ec] Unit .............. [1] Port Logical Subblock L3IF_LE handle .... [0x0] Num physical port . [2] GPN Base .......... [1104] --snip--
Anmerkung: Bei der Schnittstelle, an der das MAC gelernt hat, handelt es sich um eine einzige Schnittstelle anstelle eines Port-Channels. Mit diesem Befehl wird die GPN-Schnittstellenzuordnung bestimmt.
C9400#show platform software fed active ifm mappings gpn Mappings Table GPN Interface IF_ID ---------------------------------------------------------------- 101 GigabitEthernet1/0/1 0x00000007 102 GigabitEthernet1/0/2 0x00000008 103 GigabitEthernet1/0/3 0x00000009 --snip--
Abkürzung/Begriff |
Definition |
||
siHandle |
Station index Handle. Die Paketumschreibinformationen (RI = Rewrite Index) und die ausgehenden Schnittstelleninformationen (DI = Destination Index). |
||
Replication Bitmap für Dualcore auf einem Supervisor ASIC: |
|||
Akronym/Begriff |
Definition |
||
Lokale ASIC (LD = Lokale Daten) |
Ziel auf demselben ASIC, demselben Core wie die Quelle. |
||
Kernkopie (CD = Core Data) |
Ziel auf demselben ASIC, einem anderen Core. |
||
Remote-ASIC (RD = Remote-Daten) |
Ziel auf einem anderen ASIC. |
C9400#show platform hardware fed active fwd-asic abstraction print-resource-handle 0x7fe5c6865f78 1 Handle:0x7fe5c6865f78 Res-Type:ASIC_RSC_SI Res-Switch-Num:255 Asic-Num:255 Feature-ID:AL_FID_L3_UNICAST_IPV4 Lkp-ftr-id:LKP_FEAT_INVALID ref_count:2 priv_ri/priv_si Handle: 0x7fe5c6864938Hardware Indices/Handles: index0:0xcd mtu_index/l3u_ri_index0:0x0 index1:0xcd mtu_index/l3u_ri_index1:0x0 index2:0xcd mtu_index/l3u_ri_index2:0x0 index3:0xcd mtu_index/l3u_ri_index3:0x0 index4:0xcd mtu_index/l3u_ri_index4:0x0 index5:0xcd mtu_index/l3u_ri_index5:0x0 Features sharing this resource:64 (1)] 55 (1)] Cookie length: 56 00 00 00 00 00 00 00 00 64 00 00 00 00 00 00 00 00 00 00 00 07 00 20 bb c0 5e 53 51 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Detailed Resource Information (ASIC#0) ---> ASIC instance 0 = Supervisor ASIC 0, core 0 ---------------------------------------- Station Index (SI) [0xcd] RI = 0x29 -------------------------------> Rewrite index (no MAC rewrite for L2 forwarding)
DI = 0x51c2 -------------------------------> Destination index = outgoing interface stationTableGenericLabel = 0 stationFdConstructionLabel = 0 lookupSkipIdIndex = 0 rcpServiceId = 0 dejaVuPreCheckEn = 0x1 Replication Bitmap: LD RD CD Detailed Resource Information (ASIC#1) ---> ASIC instance 1 = Supervisor ASIC 0, core 1 --snip-- Detailed Resource Information (ASIC#2) ---> ASIC instance 2 = Supervisor ASIC 1, core 0 --snip-- Detailed Resource Information (ASIC#3) ---> ASIC instance 3 = Supervisor ASIC 1, core 1 --snip-- Detailed Resource Information (ASIC#4) ---> ASIC instance 4 = Supervisor ASIC 2, core 0 --snip-- Detailed Resource Information (ASIC#5) ---> ASIC instance 5 = Supervisor ASIC 2, core 1 --snip--
C9400#show platform hardware fed active fwd-asic resource asic all destination-index range 0x51c2 0x51c2 ASIC#0: --snip-- ASIC#1: --snip-- ASIC#2: -------------------------> ASIC Instance 2 = Supervisor ASIC 1, core 0 Destination Index (DI) [0x51c2] portMap = 0x00000000 00001000 ---> binary 0001 0000 0000 0000 = Port 12 (see next command output) cmi1 = 0 (read right to left, zero based) rcpPortMap = 0 CPU Map Index (CMI) [0] ctiLo0 = 0 ctiLo1 = 0 ctiLo2 = 0 cpuQNum0 = 0 cpuQNum1 = 0 cpuQNum2 = 0 npuIndex = 0 stripSeg = 0 copySeg = 0 ASIC#3: -------------------------> ASIC instance 3 = Supervisor ASIC 1, core 1 Destination Index (DI) [0x51c2] portMap = 0x00000000 00100000 ---> binary 0001 0000 0000 0000 0000 0000 = Port 20 (see next command output) cmi1 = 0 (read right to left, zero based) rcpPortMap = 0 CPU Map Index (CMI) [0] ctiLo0 = 0 ctiLo1 = 0 ctiLo2 = 0 cpuQNum0 = 0 cpuQNum1 = 0 cpuQNum2 = 0 npuIndex = 0 stripSeg = 0 copySeg = 0 ASIC#4: --snip-- ASIC#5: --snip--
C9400#show platform software fed active ifm mappings Interface IF_ID Inst Asic Core Port SubPort Mac Cntx LPN GPN Type Active GigabitEthernet1/0/1 0x7 2 1 0 0 0 4 4 1 101 NIF Y GigabitEthernet1/0/2 0x8 2 1 0 1 1 4 4 2 102 NIF Y --snip-- GigabitEthernet1/0/13 0x13 2 1 0 12 4 0 0 13 1105 NIF Y --snip-- GigabitEthernet5/0/21 0x8f 3 1 1 20 4 5 5 21 1104 NIF Y --snip--
C9400#show etherchannel summary --snip-- Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------- 1 Po1(SU) LACP Gi1/0/13(P) Gi5/0/21(P)
Es sind keine MAC-Umschreibungsinformationen zu erwarten, da es sich um einen Eintrag für die Layer-2-MAC-Weiterleitung handelt.
C9400#show platform hardware fed active fwd-asic resource asic all rewrite-index range 0x29 0x29 1 ASIC#0: Rewrite Data Table Entry, ASIC#:0, rewrite_type:1, RI:41 ---> dec 41 = hex 0x29 MAC Addr: MAC Addr: 20:bb:c0:5e:53:51, L3IF LE Index 111 ASIC#1: Rewrite Data Table Entry, ASIC#:1, rewrite_type:1, RI:41 MAC Addr: MAC Addr: 20:bb:c0:5e:53:51, L3IF LE Index 111 ASIC#2:
--snip--
ASIC#3:
--snip--
ASIC#4:
--snip--
ASIC#5:
--snip--
C9400#show mac address-table address 20bb.c05e.5351 Mac Address Table ------------------------------------------- Vlan Mac Address Type Ports ---- ----------- -------- ----- 100 20bb.c05e.5351 DYNAMIC Po1 Total Mac Addresses for this criterion: 1
Abkürzung |
Definition |
DiHandle |
Zielindex-Handle. Dies sind die ausgehenden Schnittstelleninformationen. |
C9400#show platform hardware fed active fwd-asic abstraction print-resource-handle 0x7fe51001b458 1 Handle:0x7fe51001b458 Res-Type:ASIC_RSC_DI Res-Switch-Num:0 Asic-Num:255 Feature-ID:AL_FID_INVALID Lkp-ftr-id:LKP_FEAT_INVALID ref_count:21 priv_ri/priv_si Handle: (nil)Hardware Indices/Handles: index0:0x51c2 mtu_index/l3u_ri_index0:0x0 index1:0x51c2 mtu_index/l3u_ri_index1:0x0 index2:0x51c2 mtu_index/l3u_ri_index2:0x0 index3:0x51c2 mtu_index/l3u_ri_index3:0x0 index4:0x51c2 mtu_index/l3u_ri_index4:0x0 index5:0x51c2 mtu_index/l3u_ri_index5:0x0 Features sharing this resource:Cookie length: 8 01 00 00 00 c2 51 00 00 Detailed Resource Information (ASIC#0) --snip-- Detailed Resource Information (ASIC#1) --snip-- Detailed Resource Information (ASIC#2) ---> ASIC Instance 2 = Supervisor ASIC 1, core 0 ---------------------------------------- Destination Index (DI) [0x51c2] portMap = 0x00000000 00001000 -------------> binary 0001 0000 0000 0000 = Port 12 (see next command output) cmi1 = 0 (read right to left, zero based) rcpPortMap = 0 CPU Map Index (CMI) [0] ctiLo0 = 0 ctiLo1 = 0 ctiLo2 = 0 cpuQNum0 = 0 cpuQNum1 = 0 cpuQNum2 = 0 npuIndex = 0 stripSeg = 0 copySeg = 0
Detailed Resource Information (ASIC#3) ---> ASIC Instance 3 = Supervisor ASIC 1, core 1 ---------------------------------------- Destination Index (DI) [0x51c2] portMap = 0x00000000 00100000 ---> binary 0001 0000 0000 0000 0000 0000 = Port 20 (see next command output) cmi1 = 0 (read right to left, zero based) rcpPortMap = 0 CPU Map Index (CMI) [0] ctiLo0 = 0 ctiLo1 = 0 ctiLo2 = 0 cpuQNum0 = 0 cpuQNum1 = 0 cpuQNum2 = 0 npuIndex = 0 stripSeg = 0 copySeg = 0
Detailed Resource Information (ASIC#4) --snip-- Detailed Resource Information (ASIC#5) --snip--
C9400#show platform software fed active ifm mappings
Interface IF_ID Inst Asic Core Port SubPort Mac Cntx LPN GPN Type Active GigabitEthernet1/0/1 0x7 2 1 0 0 0 4 4 1 101 NIF Y GigabitEthernet1/0/2 0x8 2 1 0 1 1 4 4 2 102 NIF Y --snip-- GigabitEthernet1/0/13 0x13 2 1 0 12 4 0 0 13 1105 NIF Y --snip-- GigabitEthernet5/0/21 0x8f 3 1 1 20 4 5 5 21 1104 NIF Y --snip--
C9400#show etherchannel summary --snip-- Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------- 1 Po1(SU) LACP Gi1/0/13(P) Gi5/0/21(P)
Abkürzung/Begriff |
Definition |
VLAN:10 |
MVID 10. VLAN 100 verwendet intern im Switch die zugeordnete VLAN-ID (MVID) 10. |
GPN:1104 |
Globale Portnummer von Port-Channel 1. |
MAC:0 x 20 bbc05e5351 |
MAC-Adresse 20bb.c05e.5351 |
Beispielausgabe der Hardware-Programmiermethode 2:
C9400#show platform hardware fed active matm macTable vlan 100 --snip-- HEAD: MAC address 20bb.c05e.5351 in VLAN 100 KEY: vlan 10, mac 0x20bbc05e5351, l3_if 0, gpn 1104, epoch 0, static 0, flood_en 0, vlan_lead_wless_flood_en 0, client_home_asic 0 MASK: vlan 0, mac 0x0, l3_if 0, gpn 0, epoch 0, static 0, flood_en 0, vlan_lead_wless_flood_en 0, client_home_asic 0 SRC_AD: need_to_learn 0, lrn_v 0, catchall 0, static_mac 0, chain_ptr_v 0, chain_ptr 0, static_entry_v 0, auth_state 0, auth_mode 0, traf_mode 0, is_src_ce 0 DST_AD: si 0xc7, bridge 0, replicate 0, blk_fwd_o 0, v4_mac 0, v6_mac 0, catchall 0, ign_src_lrn 0, port_mask_o 0, afd_cli_f 0, afd_lbl 0, priority 3, dest_mod_idx 0, destined_to_us 0, pv_trunk 1
--snip--
C9400#show platform software fed active vlan 100 VLAN Fed Information Vlan Id IF Id LE Handle STP Handle L3 IF Handle SVI IF ID MVID --------------------------------------------------------------------------------------------------------------- 100 0x0000000000420011 0x00007fe5c4616ef8 0x00007fe5c4617778 0x00007fe5c50dac28 0x00000000000002ea 10
C9400#show platform software fed active ifm mappings etherchannel Mappings Table Chan Interface IF_ID ---------------------------------------------------- 1 Port-channel1 0x000002ec --snip--
C9400#show platform software fed active ifm if-id 0x000002ec Interface IF_ID : 0x00000000000002ec Interface Name : Port-channel1 Interface Block Pointer : 0x7fe5c685df98 Interface State : READY Interface Status : ADD, UPD Interface Ref-Cnt : 5 Interface Type : ETHERCHANNEL Port Type : SWITCH PORT Channel Number : 1 SNMP IF Index : 720 Port Handle : 0x50002f6 #Of Active Ports : 2 Base GPN : 1104 Index[2] : 0000000000000013 Index[3] : 000000000000008f Port Information Handle ............ [0x50002f6] Type .............. [L2-Ethchannel] Identifier ........ [0x2ec] Unit .............. [1] Port Logical Subblock L3IF_LE handle .... [0x0] Num physical port . [2] GPN Base .......... [1104] --snip--
Anmerkung: Wenn es sich bei der Schnittstelle, die der Mac gelernt hat, um eine einzige Schnittstelle anstatt eines Port-Channels handelt, wird der nächste Befehl verwendet, um die GPN-Schnittstellenzuordnung zu bestimmen:
C9400#show platform software fed active ifm mappings gpn Mappings Table GPN Interface IF_ID ---------------------------------------------------------------- 101 GigabitEthernet1/0/1 0x00000007 102 GigabitEthernet1/0/2 0x00000008 103 GigabitEthernet1/0/3 0x00000009 --snip--
Überprüfen Sie die TCAM-Auslastung für die MAC-Adresseinträge in jeder Supervisor ASIC-Instanz, um sicherzustellen, dass dem Switch nicht der TCAM-Speicherplatz zum Speichern von Einträgen in der Hardware ausgeht.
C9400show platform hardware fed active fwd-asic resource tcam utilization CAM Utilization for ASIC Instance [0] --snip-- CAM Utilization for ASIC Instance [1] --snip-- CAM Utilization for ASIC Instance [2] --snip-- CAM Utilization for ASIC Instance [3]---> ASIC instance 3 = Supervisor ASIC 1, Core 1
Table Max Values Used Values -------------------------------------------------------------------------------- Unicast MAC addresses 65536/1024 13/1 -------------> prefix/mask IGMP and Multicast groups 16384/1024 0/7 L2 Multicast groups 16384/1024 1/9 Directly or indirectly connected routes 49152/65536 0/0 NAT/PAT SA address and Port 0 0 QoS Access Control Entries 18432 34 Security Access Control Entries 18432 0 Ingress Netflow ACEs 1024 0 Policy Based Routing ACEs 2048 9 Egress Netflow ACEs 2048 8 Input Microflow policer ACEs 0 0 Output Microflow policer ACEs 0 0 Flow SPAN ACEs 1024 13 Control Plane Entries 1024 0 Tunnels 1024 0 Lisp Instance Mapping Entries 1024 0 Input Security Associations 512 3 Output Security Associations and Policies 512 0 SGT_DGT 8192/512 0/0 CLIENT_LE 4096/256 2/0 INPUT_GROUP_LE 1024 0 OUTPUT_GROUP_LE 1024 0 Macsec SPD 256 0 CAM Utilization for ASIC Instance [4] --snip-- CAM Utilization for ASIC Instance [5] --snip--
Alle Features (ob MAC-Adresse, Schnittstelle, VLAN usw.) werden in der Objektdatenbank gespeichert und in der Hardware als Objekte programmiert.
Das RP programmiert das FP, das FP programmiert die FED, und die FED programmiert schließlich die Weiterleitung der ASIC-Hardware durch den Supervisor. RP-Softwareeinträge werden als Objekte in der Objektdatenbank gespeichert, und die FP-Softwareeinträge werden als asynchrone Objekte in der Objektdatenbank gespeichert.
Wenn das FP die FED programmiert (die wiederum den Supervisor für die Weiterleitung des ASIC programmiert), sendet die FED eine Bestätigung an das FP. Das FP leitet es dann an den RP weiter, um anzugeben, dass die Hardwareprogrammierung erfolgreich abgeschlossen wurde. Wenn die FED-Hardwareprogrammierung fehlt oder nicht korrekt ist, können Sie mit diesem folgenden Befehl nach Problemen und/oder Bestätigungen suchen.
C9400#show platform software object-manager fp active statistics Forwarding Manager Asynchronous Object Manager Statistics Object update: Pending-issue: 0, Pending-acknowledgement: 0 Batch begin: Pending-issue: 0, Pending-acknowledgement: 0 Batch end: Pending-issue: 0, Pending-acknowledgement: 0 Command: Pending-acknowledgement: 0 Total-objects: 3269 Stale-objects: 0 Resolve-objects: 0 Error-objects: 0 Paused-types: 0
Wenn der vorherige Befehl Objekte ohne null im ausstehenden Problemzustand anzeigt, suchen Sie mit diesem Befehl die betroffene Objektnummer:
C9400#show platform software object-manager fp active pending-issue-update
Verwenden Sie dann diesen Befehl, um den mit der Objektnummer verknüpften Prozess zu bestimmen.
C9400#show platform software object-manager fp active object {object#}
Verwenden Sie auf der RP-Seite diesen Befehl, um zu prüfen, ob ein Objekt, das vom FP nicht bestätigt wurde, gelöscht wurde (Pend löschen).
C9400#show platform software object-manager rp active object-type-info
Object type Name Count Del Pend Layer ------------------------------------------------------------------------------ CC cc 5 0 2 SPA spa 0 0 4 PORT_DPIDB port_dpidb 164 0 10 CHANNEL_DPIDB channel_dpidb 0 0 12 VIRTUAL_DPIDB virtual_dpidb 503 0 13 SW_DPIDB sw_dpidb 0 0 17 VLAN vlan 0 0 19
--snip--
Überprüfen Sie, ob der CoPP (Control Plane Policy) in Hardware-UADP 2.0 für Datenverkehr, der an die Software-CPU geleitet wird, verworfen wird. Dies kann sich auf MAC Learning und die Stabilität des Spanning Tree auswirken.
C9400#show policy-map control-plane Control Plane Service-policy input: system-cpp-policy --snip-- Class-map: system-cpp-police-sw-forward (match-any) 0 packets, 0 bytes 5 minute offered rate 0000 bps, drop rate 0000 bps Match: none police: rate 1000 pps, burst 244 packets conformed 1298 bytes; actions: transmit exceeded 0 bytes; actions: drop --snip-- Class-map: system-cpp-police-l2-control (match-any) 0 packets, 0 bytes 5 minute offered rate 0000 bps, drop rate 0000 bps Match: none police: rate 500 pps, burst 122 packets conformed 239197001 bytes; actions: transmit exceeded 0 bytes; actions: drop --snip-- Class-map: system-cpp-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0000 bps, drop rate 0000 bps Match: none police: rate 1000 pps, burst 244 packets conformed 0 bytes; actions: transmit exceeded 0 bytes; actions: drop Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0000 bps, drop rate 0000 bps Match: any
Dieselbe CoPP-Ausgabe wie im vorherigen Beispiel wird hier in einem detaillierteren und einfacher zu lesenden (komprimierten) Format angezeigt.
C9400#show platform hardware fed active qos queue stats internal cpu policer CPU Queue Statistics ============================================================================================ (default) (set) Queue Queue QId PlcIdx Queue Name Enabled Rate Rate Drop(Bytes) Drop(Frames) 0 11 DOT1X Auth Yes 1000 1000 0 0 1 1 L2 Control Yes 2000 400 0 0 2 14 Forus traffic Yes 1000 1000 0 0 3 0 ICMP GEN Yes 600 600 0 0 4 2 Routing Control Yes 5400 1800 0 0 5 14 Forus Address resolution Yes 1000 1000 0 0 6 0 ICMP Redirect Yes 600 600 0 0 7 16 Unused Yes 1000 1000 0 0 8 4 L2 LVX Cont Pack Yes 1000 1000 0 0 9 16 EWLC Control Yes 1000 1000 0 0 10 16 EWLC Data Yes 1000 1000 0 0 11 13 L2 LVX Data Pack Yes 1000 1000 0 0 12 0 BROADCAST Yes 600 600 0 0 13 10 Learning cache ovfl Yes 100 200 0 0 14 13 Sw forwarding Yes 1000 1000 0 0 15 8 Topology Control Yes 13000 13000 0 0 16 12 Proto Snooping Yes 2000 2000 0 0 17 16 DHCP Snooping Yes 1000 1000 0 0 18 9 Transit Traffic Yes 500 400 0 0 19 10 RPF Failed Yes 100 200 0 0 20 15 MCAST END STATION Yes 2000 2000 0 0 21 13 LOGGING Yes 1000 1000 0 0 22 7 Punt Webauth Yes 1000 1000 0 0 23 10 Crypto Control Yes 100 200 0 0 24 10 Exception Yes 100 200 0 0 25 3 General Punt Yes 200 200 0 0 26 10 NFL SAMPLED DATA Yes 100 200 0 0 27 2 Low Latency Yes 5400 1800 0 0 28 10 EGR Exception Yes 100 200 0 0 29 5 Stackwise Virtual Control No 8000 8000 0 0 30 9 MCAST Data Yes 500 400 0 0 31 10 Gold Pkt Yes 100 200 0 0 * NOTE: CPU queue policer rates are configured to the closest hardware supported value CPU Queue Policer Statistics ==================================================================== Policer Policer Accept Policer Accept Policer Drop Policer Drop Index Bytes Frames Bytes Frames ------------------------------------------------------------------- 0 3132 36 0 0 1 239197001 721952 0 0 2 123004776 978818 0 0 3 0 0 0 0 4 0 0 0 0 5 0 0 0 0 6 0 0 0 0 7 0 0 0 0 8 1024 16 0 0 9 0 0 0 0 10 13600 200 0 0 11 0 0 0 0 12 0 0 0 0 13 1298 3 0 0 14 80520 9158 0 0 15 2189268 23733 0 0 16 0 0 0 0 17 0 0 0 0 CPP Classes to queue map ====================================================================================== PlcIdx CPP Class : Queues -------------------------------------------------------------------------------------- 0 system-cpp-police-data : ICMP GEN/BROADCAST/ICMP Redirect/
10 system-cpp-police-sys-data : Learning cache ovfl/Crypto Control/Exception/EGR Exception/NFL SAMPLED DATA/Gold Pkt/RPF Failed/ 13 system-cpp-police-sw-forward : Sw forwarding/LOGGING/L2 LVX Data Pack/ 9 system-cpp-police-multicast : Transit Traffic/MCAST Data/ 15 system-cpp-police-multicast-end-station : MCAST END STATION / 7 system-cpp-police-punt-webauth : Punt Webauth/ 1 system-cpp-police-l2-control : L2 Control/ 5 system-cpp-police-stackwise-virt-control : Stackwise Virtual Control/ 2 system-cpp-police-routing-control : Routing Control/Low Latency/ 3 system-cpp-police-control-low-priority : General Punt/ 4 system-cpp-police-l2lvx-control : L2 LVX Cont Pack/ 8 system-cpp-police-topology-control : Topology Control/ 11 system-cpp-police-dot1x-auth : DOT1X Auth/ 12 system-cpp-police-protocol-snooping : Proto Snooping/ 14 system-cpp-police-forus : Forus Address resolution/Forus traffic/ 5 system-cpp-police-stackwise-virt-control : Stackwise Virtual Control/ 16 system-cpp-default : DHCP Snooping/Unused/EWLC Control/EWLC Data/
Überprüfen Sie die CPU-Pfade (Hardware-UADP 2.0 zur Software-CPU)-Statistik aus Software-Sicht (CPU).
C9400#show platform software infrastructure lsmpi LSMPI interface internal stats: enabled=0, disabled=0, throttled=0, unthrottled=0, state is ready Input Buffers = 8801257 Output Buffers = 5506129 rxdone count = 8801257 txdone count = 5506128 Rx no particletype count = 0 Tx no particletype count = 0 Txbuf from shadow count = 0 No start of packet = 0 No end of packet = 0 Punt drop stats: Bad version 0 Bad type 0 Had feature header 0 Had platform header 0 Feature header missing 0 Common header mismatch 0 Bad total length 0 Bad packet length 0 Bad network offset 0 Not punt header 0 Unknown link type 0 No swidb 0 Bad ESS feature header 0 No ESS feature 0 No SSLVPN feature 0 No PPP bridge feature 0 Punt For PPP bridge type packets 0 Punt For Us type unknown 0 EPC CP RX Pkt cleansed 0 Punt cause out of range 0 IOSXE-RP Punt packet causes: 42879 Layer2 control and legacy packets 3644168 ARP request or response packets 7584 For-us data packets 1794 Mcast Directly Connected Source packets 1573 Mcast PIM signaling packets 750076 For-us control packets 38058 Layer2 bridge domain data packet packets 3823736 Layer2 control protocols packets FOR_US Control IPv4 protcol stats: 750076 [proto=0] packets Packet histogram(500 bytes/bin), avg size in 125, out 126: Pak-Size In-Count Out-Count 0+: 8228322 5207592 500+: 41355 1717 1000+: 4331 2402 1500+: 35860 20017 Lsmpi11/3 is up, line protocol is up <-- CPU interface Hardware is LSMPI MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not set Unknown, Unknown, media type is unknown media type output flow-control is unsupported, input flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/1500/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 8309868 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 0 watchdog, 0 multicast, 0 pause input 5231728 packets output, 659535525 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 output buffer failures, 0 output buffers swapped out
C9400#show platform software infrastructure lsmpi punt LSMPI punt statistics Total packets consumed: 876 Total packets forwarded: 8468766 First frag packets: 0 Total packets consumed & forwarded: 0 Cause Total Total Length Dot1q encap Other SKB consumed forwarded error exceeded linktype invalid MPLS ICMP Can't Fragment 0 0 0 0 0 0 IPv4 Options 0 0 0 0 0 0 Layer2 control and legacy 0 0 0 0 0 0 PPP Control 0 0 0 0 0 0 CLNS IS-IS Control 0 0 0 0 0 0 HDLC keepalives 0 0 0 0 0 0
--snip--
Statistiken zum CPU-Einspeisepfad (Software-CPU zu Hardware-Supervisor) aus Software-Sicht (CPU) überprüfen.
C9400#show platform software infrastructure inject Statistics for L3 injected packets: 5233473 total inject pak, 3 failed 0 sent, 859329 prerouted 0 non-CEF capable, 855296 non-unicast 859826 IP, 0 IPv6 0 MPLS, 0 Non-IP Tunnel 0 UDLR tunnel, 0 P2MP replicated mcast 0 Non-IP Fastswitched over Tunnel, 4373497 legacy pak path 0 Other packet 0 IP fragmented 644 normal, 391 nexthop 858788 adjacency, 150 feature 0 undefined 3 pak find no adj, 0 no adj-id 137322 sb alloc, 856085 sb local 0 p2mcast failed count 0 p2mcast enqueue fail 0 unicast dhc 0 mobile ip 0 IPv6 NA 0 IPv6 NS 0 Transport failed cases 0 Grow packet buffer per feature packet inject statistics 150 Feature multicast 0 Feature Edge Switching Service 0 Feature Session Border Controller 0 Feature interrupt level 0 Feature use outbound interface 0 Feature interrupt level with OCE 0 Feature ICMPv6 error message 0 Feature Session Border Controller media packet injection 0 Feature Tunnel Ethernet over GRE 0 Feature Secure Socket Layer Virtual Private Network 0 Feature EPC Wireshark injecting packets Statistics for L2 injected packets: 0 total L2 inject pak, 0 failed 0 total BD inject pak, 0 failed 0 total EFP inject pak, 0 failed 0 total VLAN inject pak, 0 failed
Überprüfen Sie die Statistiken zum CPU-Stempel/Einspeisepfad aus FED-Perspektive (UADP 2.0).
C9400#show platform software fed active lsmpi stat LSMPI Statistics ------------------------------------------- Transmit: -----------------------------------> FED transmit = FED (Supervisor) punt to CPU Packet Count : 8469445 Bytes Count : 1055390613 particle Count : 8951009 particle with App : 7258 Ring Full Error : 0 No Buff Error : 0 TX Ring Free : 2047 TX Ring Busy : 0 TX Ring Size : 2048 TXDone Ring Free : 6816 TXDone Ring Busy : 9567 TXDone Ring Size : 16384 Receive: ---------------------------------> FED receive = CPU inject to FED (Supervisor) Packet Count : 5450099 Bytes Count : 675084903 Particle Count : 5695697 Particles with App : 4294966854 RX Done Count : 5696139 No SOP : 0 No EOP : 0 Not Enough Buf : 0 Max Not Enough Buf : 0 RX Ring Free : 4095 RX Ring Busy : 0 RX Ring Size : 4096 RXDone Ring Free : 8191 RXDone Ring Busy : 0 RXDone Ring Size : 8192 -------------------------------------------
Überprüfen Sie den CPU-Pfade (Hardware-Supervisor zu Software-CPU) aus FED-Sicht (Supervisor).
C9400#show platform software fed active punt cause summary Statistics for all causes Cause Cause Info Rcvd Dropped ------------------------------------------------------------------------------ 7 ARP request or response 3644168 0 11 For-us data 1524 0 12 Mcast Directly Connected Source 1794 0 25 Mcast PIM signaling 1573 0 55 For-us control 750461 0 58 Layer2 bridge domain data packet 38058 0 96 Layer2 control protocols 3825228 0 ------------------------------------------------------------------------------
Überprüfen Sie den Zustand der 31 einzelnen CPU-Postenwarteschlangen aus Sicht der FED (Supervisor).
C9400#show platform software fed active cpu-interface queue retrieved dropped invalid hol-block ------------------------------------------------------------------------- Routing Protocol 790844 0 0 0 L2 Protocol 2774488 0 0 0 sw forwarding 0 0 0 0 broadcast 0 0 0 0 icmp 0 0 0 0 icmp redirect 0 0 0 0 logging 0 0 0 0 rpf-fail 1573 0 0 0 DOT1X authentication 0 0 0 0 Forus Traffic 1524 0 0 0 Forus Resolution 3644192 0 0 0 Wireless q5 0 0 0 0 Wireless q1 0 0 0 0 Wireless q2 0 0 0 0 Wireless q3 0 0 0 0 Wireless q4 0 0 0 0 Learning cache 0 0 0 0 Topology control 1198807 0 0 0 Proto snooping 0 0 0 0 BFD Low latency 0 0 0 0 Transit Traffic 0 0 0 0 Multi End station 38058 0 0 0 Health Check 0 0 0 0 Health Check 0 0 0 0 Crypto control 0 0 0 0 Exception 0 0 0 0 General Punt 0 0 0 0 NFL sampled data 0 0 0 0 STG cache 0 0 0 0 EGR exception 0 0 0 0 FSS 0 0 0 0 Multicast data 1794 0 0 0
C9400#show platform software fed active punt cpuq all Punt CPU Q Statistics =========================================== —snip— CPU Q Id : 1 CPU Q Name : CPU_Q_L2_CONTROL Packets received from ASIC : 2669864 -----------> Packets received by the FED process from the Supervisor forwarding ASICs Send to IOSd total attempts : 2669864 -----------> Packets sent from the FED process to IOSd Send to IOSd failed count : 0 RX suspend count : 0 RX unsuspend count : 0 RX unsuspend send count : 0 RX unsuspend send failed count : 0 RX consumed count : 0 RX dropped count : 0 RX non-active dropped count : 0 RX conversion failure dropped : 0 RX INTACK count : 2243784 RX packets dq'd after intack : 5074 Active RxQ event : 2243785 RX spurious interrupt : 322266 CPU Q Id : 2 CPU Q Name : CPU_Q_FORUS_TRAFFIC Packets received from ASIC : 1524 Send to IOSd total attempts : 1524 Send to IOSd failed count : 0 RX suspend count : 0 RX unsuspend count : 0 RX unsuspend send count : 0 RX unsuspend send failed count : 0 RX consumed count : 0 RX dropped count : 0 RX non-active dropped count : 0 RX conversion failure dropped : 0 RX INTACK count : 1347 RX packets dq'd after intack : 8 Active RxQ event : 1347 RX spurious interrupt : 38 —snip—
Überprüfen Sie die Statistiken zum CPU-Einspeisepfad (Software-CPU zu Hardware-Supervisor) aus FED-Perspektive (Supervisor).
C9400#show platform software fed active inject cause summary Statistics for all causes Cause Cause Info Rcvd Dropped ------------------------------------------------------------------------------ 1 L2 control/legacy 4331682 0 2 QFP destination lookup 290 0 3 QFP IPv4/v6 nexthop lookup 391 0 7 QFP adjacency-id lookup 859393 265 8 Mcast specific inject packet 150 0 12 ARP request or response 601 0 ------------------------------------------------------------------------------
Überprüfen Sie den Zustand der beiden einzelnen CPU-Einzugs-Warteschlangen aus Sicht der FED (UADP 2.0).
C9400#show platform software fed active inject cpuq all Inject CPU Q Statistics =========================================== CPU Q Id : 0 CPU Q Name : TX_CPUQ_PRIO_LOW ---> low priority CPU inject queue Packets received from IOSd : 168342 Enq to pkt driver total attempts : 168277 Enq to pkt driver failed count : 0 Count of TX CMPL received : 168277 TX suspend count : 0 TX unsuspend count : 0 TX dropped count : 265 TX punted count : 0 TX App enq failed : 0 CPU Q Id : 7 CPU Q Name : TX_CPUQ_PRIO_HI ---> high priority CPU inject queue Packets received from IOSd : 5024664 Enq to pkt driver total attempts : 5024664 Enq to pkt driver failed count : 0 Count of TX CMPL received : 5024664 TX suspend count : 0 TX unsuspend count : 0 TX dropped count : 0 TX punted count : 0 TX App enq failed : 0 Stats for all txq: --------------------------------------------- TX chunk malloc fail count : 0 ---------------------------------------------
C9400#show platform software fed active matm stats MATM counters Total non-cpu mac entries : 10 Mac Learn SPI Msg Count : 0 Mac Learn SPI Err Count : 0 Mac Delete SPI Msg Count : 0 Mac Delete SPI Err Count : 0 Mac Learn Count : 967 Mac Add Count : 989 Mac AL add Count : 971 Mac Del Count : 957 Mac AL Del Count : 961 Mac Move Count : 2 ---> MAC moves between interfaces (see details above) Mac AL Move Count : 0 Mac Clear Count : 0 Mac Del all count : 6 Mac table create Count : 9 Mac VP event Count : 5 Mac Update info Count : 0 Mac Vlan age config Event Count : 0 Mac Vlan Link Event Count : 6 Mac SVI linkEvent Count : 3 Mac Bsync Event Count : 0 Mac Isync Event Count : 0 Mac Recon Start Count : 0 Mac Recon Event Count : 0 Mac IFM event Count : 75 Mac FEC Event Count : 0 Mac Aging Tick Count : 0 Mac Retry event Count : 0 Mac Hw Update Err Count : 0 Mac In retryQ Count : 0
C9400#configure terminal C9400(config)#mac address-table notification ? change Enable/Disable MAC Notification feature on the switch mac-move Enable Mac Move Notification threshold Configure L2 Table monitoring C9400(config)#mac address-table notification mac-move ---> enabled by default, syslog generated for any MAC move (show logging) C9400(config)#mac address-table notification change ? history-size Number of MAC notifications to be stored interval Interval between the MAC notifications <cr> <cr> C9400(config)#mac address-table notification change ---> disabled by default
C9400#show mac address-table notification mac-move MAC Move Notification: enabled
C9400#show mac address-table notification change
MAC Notification Feature is Enabled on the switch Interval between Notification Traps : 1 secs Number of MAC Addresses Added : 0 Number of MAC Addresses Removed : 0 Number of Notifications sent to NMS : 0 Maximum Number of entries configured in History Table : 1 Current History Table Length : 0 MAC Notification Traps are Disabled History Table contents ----------------------
Dieser Befehl gibt alle Gründe an, aus denen ein UADP 2.0-Weiterleitungs-ASIC ein Paket verwirft:
C9400#show platform hardware fed active fwd-asic drops exceptions
****EXCEPTION STATS ASIC INSTANCE 0 (asic/core 0/0)**** ================================================================================= Asic/core | NAME | prev | current | delta ================================================================================= 0 0 NO_EXCEPTION 0 0 0 0 0 IPV4_CHECKSUM_ERROR 0 0 0 0 0 ROUTED_AND_IP_OPTIONS_EXCEPTION 0 0 0 0 0 CTS_FILTERED_EXCEPTION 0 0 0 0 0 SIA_TTL_ZERO 0 0 0 0 0 ALLOW_NATIVE_EXCEPTION_COUNT 0 0 0 0 0 ALLOW_DOT1Q_EXCEPTION_COUNT 0 0 0 0 0 ALLOW_PRIORITY_TAGGED_EXCEPTION_COUNT 0 0 0 0 0 ALLOW_UNKNOWN_ETHER_TYPE_EXCEPTION 0 0 0 0 0 IP_SOURCE_GUARD_VIOLATION 0 0 0 0 0 SECURE_L3IF_LEARNING_VIOLATION 0 0 0 0 0 AUTH_DRIVEN_DROP 0 0 0 0 0 VLAN_LOADBALANCE_GROUP_DENY 0 0 0 0 0 RPF_UNICAST_FAIL 0 0 0 0 0 RPF_UNICAST_FAIL_SUPPRESS 0 0 0 0 0 RPF_UNICAST_CHECK_INCOMPLETE 0 0 0 0 0 RPF_MULTICAST_FAIL 0 0 0 0 0 PKT_DROP_COUNT 0 0 0 0 0 SOURCE_ROUTE_EXCEPTION 0 0 0 0 0 IGR_MISC_FATAL_ERROR 0 0 0 0 0 BLOCK_FORWARD 0 0 0 0 0 POLICER_DROP 0 0 0 0 0 DENY_ROUTE 0 0 0 0 0 DENY_BRIDGE 0 0 0 0 0 STATIC_MAC_VIOLATION 0 0 0 0 0 STATIC_IP_VIOLATION 0 0 0 0 0 FPM_DROP_PACKET 0 0 0 0 0 IGR_EXCEPTION_L4_ERROR 0 0 0 0 0 IGR_EXCEPTION_L5_ERROR 0 0 0 0 0 IGR_EXCEPTION_HARDWARE_PARSE_EXCEPTION 0 0 0 0 0 IGR_EXCEPTION_INVALID_VLAN_DROP 0 0 0 0 0 IGR_EXCEPTION_31 0 0 0 0 0 FRAGMENTING_IPV4_WITH_OPTIONS 0 0 0 0 0 FRAGMENTING_IPV6_WITH_EXTENSIONS 0 0 0 0 0 ICMP_REDIRECT 0 0 0 0 0 MTU_FAIL_PUNT_TO_CPU_NO_IP_UNREACHABLE 0 0 0 0 0 LINK_LOCAL_CHECK_FAIL_NO_IP_UNREACHABLE 0 0 0 0 0 IP_UNICAST_TTL_REACHED_ZERO 0 0 0 0 0 MISC_FATAL_ERROR 0 0 0 0 0 STP_OR_FLEXLINK_DROP 0 0 0 0 0 PROTECTED_PORT_DROP 0 0 0 0 0 PVLAN_ISOLATED_CHECK_FAILED 0 0 0 0 0 PVLAN_COMMUNITY_CHECK_FAILED 0 0 0 0 0 DEJA_VU_CHECK_FAILED 0 0 0 0 0 NOT_VLAN_LOAD_BALANCE_GROUP_ALLOWED 0 0 0 0 0 RSPAN_DROP 0 0 0 0 0 SPLIT_HORIZON_DROP 0 0 0 0 0 SYSTEM_TTL_DROP 0 0 0 0 0 PRUNED 0 0 0 0 0 DENY_NO_IP_UNREACHABLE 0 0 0 0 0 IP_MULTICAST_TTL_REACHED_ZERO 0 0 0 0 0 MTU_FAIL_DROP_BRIDGED 0 0 0 0 0 MTU_FAIL_DROP_BRIDGED_IP_ROUTED 0 0 0 0 0 MTU_FAIL_ERSPAN 0 0 0 0 0 LINK_LOCAL_CHECK_FAIL_L3M_VALID 0 0 0 0 0 DENY_NOT_NO_IP_UNREACHABLE 0 0 0 0 0 MTU_FAIL_PUNT_TO_CPU_NOT_NO_IP_UNREACHABLE 0 0 0 0 0 LINK_LOCAL_CHECK_FAIL_NOT_NO_IP_UNREACHABLE 0 0 0 0 0 COPY_TO_CPU 0 0 0 0 0 EGR_L3_ERROR 0 0 0 0 0 EGR_L4_ERROR 0 0 0 0 0 EGR_L5_ERROR 0 0 0 0 0 EGR_HARDWARE_PARSE_EXCEPTION 0 0 0 0 0 EGR_SHOW_FORWARD_DROP 0 0 0 ****EXCEPTION STATS ASIC INSTANCE 1 (asic/core 0/1)**** ================================================================================= Asic/core | NAME | prev | current | delta ================================================================================= 0 1 NO_EXCEPTION 13168 16679 3511 0 1 IPV4_CHECKSUM_ERROR 0 0 0 0 1 ROUTED_AND_IP_OPTIONS_EXCEPTION 81 103 22
--snip--
Überprüfen Sie die aktiven ASIC-Statistiken für die UADP 2.0-Weiterleitung an den Supervisor, die einer bestimmten Oberfläche an der Vorderseite zugeordnet sind. In diesem Beispiel wird die Schnittstelle Gig1/0/13 verwendet.
Ausgabebeispiel:
C9400#show platform hardware cman fp active data-path 1 13 detail ---> Slot 1, interface 13
showing cman data-path for frontpanel 1/0/13 fp_portmap.xml: ---> Supervisor ASIC 1, core 0 is associated with front panel (fp) interface Gig1/0/13 id 13 asic 1 core 0 port 12 mac 0 subport 4 contextid 0 maxspeed DEV_PORT_SPEED_1G gpn 113 active 1 data path: slot 3 +- ACTIVE_SUP --+ | Sif 0 | | IQS SQS | ---> Supervisor ASIC 1, core 0 on the slot 3 active Supervisor associated with interface Gig1/0/13 | PBC | | AQM | | EQC | | ESM | | RWE | | ASIC 1 | | Core 0 | | Asic Port 12 | | | | (Mac 0) | |Nif_Rx NifTx| +--------------+ ^ | | | | | | V ============================================== Nif MAC 0 Inforation: NifRxByteGroupStats: NifTxByteGroupStats: rxBytes 4495494 txBytes 6499427 NifRxByteDestinationGroupStats: NifTxByteDestinationGroupStats: rxUnicastBytes 1174628 txUnicastBytes 1175536 rxMulticastBytes 3320866 txMulticastBytes 5298482 rxBroadcastBytes 0 txBroadcastBytes 25409 NifRxPortStatusGroupStats: NifTxFrameDestinationGroupStats: rxUnicastFrames 18326 txUnicastFrames 18330 rxMulticastFrames 21387 txMulticastFrames 24834 rxBroadcastFrames 0 txBroadcastFrames 51 rxPauseFrames 0 txPauseFrames 0 rxCos0PauseFrames 0 txCos0PauseFrames 0 rxCos1PauseFrames 0 txCos1PauseFrames 0 rxCos2PauseFrames 0 txCos2PauseFrames 0 rxCos3PauseFrames 0 txCos3PauseFrames 0 rxCos4PauseFrames 0 txCos4PauseFrames 0 rxCos5PauseFrames 0 txCos5PauseFrames 0 rxCos6PauseFrames 0 txCos6PauseFrames 0 rxCos7PauseFrames 0 txCos7PauseFrames 0 rxOamProcessedFrames 0 txOamFrames 0 NifRxPortStatusGroupStats: NifTxPortStatusGroupStats: rxCollisionFragments 0 txLateCollisionFrames 0 rxFcsErrorFrames 0 txsystemFcsErrorFrames 0 rxInvalidOversizeFrames 0 txOversizeFrames 0 rxMacOverrunFrames 0 txMacUnderrunFrames 0 rxIpgViolationFrames 0 txDeferredFrames 0 rxOamDroppedFrames 0 txExcessiveDeferralFrames 0 rxSymbolErrorFrames 0 txOkMultipleCollisionFrames 0 rxValidOversizeFrames 0 txOkSingleCollisionFrames 0 rxValidUndersizeFrames 0 goldFramesTruncated 0 NifRxSizeGroupStats: NifTxSizeGroupStats: rx32768toMtuFrames 0 tx32768toMtuFrames 0 rx16384to32767ByteFrames 0 tx16384to32767ByteFrames 0 rx8192to16383ByteFrames 0 tx8192to16383ByteFrames 0 rx4096to8191ByteFrames 0 tx4096to8191ByteFrames 0 rx2048to4095ByteFrames 0 tx2048to4095ByteFrames 0 rx1519to2047ByteFrames 51 tx1519to2047ByteFrames 0 rx1024to1518ByteFrames 15 tx1024to1518ByteFrames 0 rx512to1023ByteFrames 17 tx512to1023ByteFrames 187 rx256to511ByteFrames 3406 tx256to511ByteFrames 9407 rx128to255ByteFrames 6567 tx128to255ByteFrames 6580 rx65to127ByteFrames 11295 tx65to127ByteFrames 8583 rx64ByteFrames 18362 tx64ByteFrames 18458 ============================================== ----------------------------------------------------> Input queue (Igr = Ingress) IgrPacketCounters: EgrPacketCounters: packetsIn 97777 packetsIn 580324 packetsOut 97777 packetsEnqueueFcd_val 0 packetsDropped 3383 packetsMarkedForDrop 278 fpsSourcedPadErrorCount 0 padErrorPacketsIn 0 igrSourcedPadErrorCount 0 padErrorPacketsOut 0 ============================================== For RWE for core 0: RweTotalEnqStats: packetCount 580324 RweTotalDeqStats: packetCount 580046 FragmentCount 580046 ============================================== For EQC for core 0: EqcTotalEnqStats: Count 580704 EqcTotalDeqStats: Count 580324 ============================================== For aqmRedQueueStats for asic port 12: AqmRedQueueStats: (sum of all queues) ---> Output queue (Aqm = Active queue management) acceptByteCnt0 0 acceptFrameCnt0 0 acceptByteCnt1 6407742 acceptFrameCnt1 43070 acceptByteCnt2 39609 acceptFrameCnt2 395 dropByteCnt0 0 dropFrameCnt0 0 dropByteCnt1 0 dropFrameCnt1 0 dropByteCnt2 0 dropFrameCnt2 0 outOfSoftBufDropByteCnt 0 outOfSoftBufDropFrameCnt 0 maxQebDropByteCnt 0 maxQebDropFrameCnt 0 ============================================== For PBC for core 0: PbcIngressErrorDropCount: PbcEgressErrorDropCount: iCount 0 eS0Count 0 iCount 0 eS1Count 0 PbcCreditCount: PbcEnqFcErrorDropCount: creditCount 64 fCount 0 rwePbcStall 0 ============================================== For local/core 0 Switching: SqsCumulativeStatistics totalEnqStat 1368200 totalDeqStat 1368200 totalDropStat 0 SqsCumulativeStatisticsB totalEnqStat 173449513 totalDeqStat 173449513 totalDropStat 0 ============================================== For local/core 1 Switching: SqsCumulativeStatistics totalEnqStat 890114 totalDeqStat 890114 totalDropStat 0 SqsCumulativeStatisticsB totalEnqStat 105061923 totalDeqStat 105061923 totalDropStat 0 ============================================== For Sif 0 Switching: SifSifPbcCnt0: Count 81302675 SifSifPbcCnt1: Count 58187651 SifRacInsertedCnt: SifRacCopiedCnt: SifRacInsertedCnt[0] 2295051 SifRacCopiedCnt[0] 35850468 SifRacInsertedCnt[1] 1738892 SifRacCopiedCnt[1] 19265491 SifRacInsertedCnt[2] 1666479 SifRacCopiedCnt[2] 23814855 SifRacInsertedCnt[3] 2773364 SifRacCopiedCnt[3] 32727259 SifRacInsertedCnt[4] 3126116 SifRacCopiedCnt[4] 38376676 SifRacInsertedCnt[5] 2066567 SifRacCopiedCnt[5] 22176467 ============================================== For Sif 1 Switching: SifSifPbcCnt0: Count 40956521 SifSifPbcCnt1: Count 40956521 SifRacInsertedCnt: SifRacCopiedCnt: SifRacInsertedCnt[0] 11713808 SifRacCopiedCnt[0] 8615615 SifRacInsertedCnt[1] 8319576 SifRacCopiedCnt[1] 7489596 SifRacInsertedCnt[2] 8816344 SifRacCopiedCnt[2] 7608895 SifRacInsertedCnt[3] 15404080 SifRacCopiedCnt[3] 8717898 SifRacInsertedCnt[4] 16161715 SifRacCopiedCnt[4] 9685735 SifRacInsertedCnt[5] 9745420 SifRacCopiedCnt[5] 7866174
Überprüfen Sie den Status der Flusssteuerung aus Supervisor-Perspektive für die Oberfläche an der Vorderseite. So können Sie feststellen, ob eine Überlastung der Schnittstelle vorliegt.
C9400#show platform hardware cman fp active flowcontrol status
slot 1:Port 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 EsmF - - - - - - - - - - - - - - - - - - - - - - - - IqsC - - - - - - - - - - - - - - - - - - - - - - - - Port 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 EsmF - - - - - - - - - - - - - - - - - - - - - - - - IqsC - - - - - - - - - - - - - - - - - - - - - - - - slot 2: Port 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 EsmF - - - - - - - - - - - - - - - - - - - - - - - - IqsC - - - - - - - - - - - - - - - - - - - - - - - - Port 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 EsmF - - - - - - - - - - - - - - - - - - - - - - - - IqsC - - - - - - - - - - - - - - - - - - - - - - - - slot 3: Port 01 02 03 04 05 06 07 08 09 10 EsmF - - - - - - - - - - IqsC 01 - - - - - - - - - slot 4: Port 01 02 03 04 05 06 07 08 09 10 EsmF - - - - - - - - - - IqsC - - - - - - - - - - slot 5: Port 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 EsmF - - - - - - - - - - - - - - - - - - - - - - - - IqsC - - - - - - - - - - - - - - - - - - - - 01 - - - Port 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 EsmF - - - - - - - - - - - - - - - - - - - - - - - - IqsC - - - - - - - - - - - - - - - - - - - - - - - - slot 6: Possibly linecard is not inserted slot 7: Possibly linecard is not inserted
Stellen Sie sicher, dass der Kontrollverkehr von einer ASIC-Perspektive der Supervisor-Weiterleitung zwischen dem Supervisor Forwarding-ASIC auf dem aktiven Supervisor und dem Line Card-Stub-ASIC auf der Linecard über die OCI-Schnittstellen fließt.
C9400#show platform hardware cman fp active oci status processing oci information: chassis_type: 1 sup slot: 4 sup num oci ports: 8 slot_id 1 : oci_enable Enabled Link Status 0 (UP) asic_id 1 core_id 0 oci_port 3 mac_id 0 NruRxByteGroupStats: rxBytes 417829462717812 NruTxByteGroupStats: txBytes 588911286106332 slot_id 2 : oci_enable Enabled Link Status 0 (UP) asic_id 0 core_id 0 oci_port 1 mac_id 1 NruRxByteGroupStats: rxBytes 417938235716344 NruTxByteGroupStats: txBytes 588917607864892 slot_id 5 : oci_enable Enabled Link Status 0 (UP) asic_id 1 core_id 0 oci_port 4 mac_id 1 NruRxByteGroupStats: rxBytes 53195855717244 NruTxByteGroupStats: txBytes 588915422236932 slot_id 6 : oci_enable Enabled Link Status 1 (DOWN) asic_id 2 core_id 0 oci_port 6 mac_id 0 NruRxByteGroupStats: rxBytes 0 NruTxByteGroupStats: txBytes 0 slot_id 7 : oci_enable Enabled Link Status 1 (DOWN) asic_id 0 core_id 0 oci_port 2 mac_id 2 NruRxByteGroupStats: rxBytes 0 NruTxByteGroupStats: txBytes 0
Überprüfen Sie die ASIC-Statistiken der Line Card Line Card, die einer bestimmten Oberfläche an der Vorderseite zugeordnet sind. In diesem Beispiel ist die Schnittstelle Gig1/0/13 der Fokus.
Ausgabebeispiel:
Pakete, die von Gig 1/0/13 empfangen werden, geben den Empfangsport der Netzwerkschnittstelle und den Fortschritt über IQS an die Stack-Schnittstelle ein.
Von dort wird ein Paket entweder über die Stack-Schnittstelle an einen anderen Supervisor ASIC gesendet oder über SQS, AQM, EQC, ESM, RWE und dann über die Netzwerkschnittstelle mit Gig 1/0/13 übertragen.
Pakete, die von anderen Supervisor-ASICs-Schnittstellen gesendet werden, die von Gig 1/0/13 ausgehen, geben "Sif" ein und durchlaufen dann SQS, AQM, EQC, ESM, RWE. Anschließend wird die NifTx von Gig 1/0/13 gelöscht.
Für AQM gibt es 8 Tx-Warteschlangen. Wenn Sie Verwerfen aus diesen Warteschlangen sehen, können Sie mit diesem Befehl bestimmen, bei welcher Warteschlange Verlierungen auftreten: show plattform hardwarespeisung active go queue stats interface Gig 1/0/13
C9400#show platform hardware iomd 1/0 data-path 13 detail ----> slot 1, interface 13 lcportmap.xml: ---> Line Card (lc) ASIC instance 0 is associated with interface Gig1/0/13 id 13 asic 0 asicport 12 mac 23 contextid 12 intl_port_sup0 9 intl_port_sup1 1 maxspeed DEV_PORT_SPEED_1G asic_subport 4 fp_portmap.xml: ---> Supervisor ASIC 1, core 0 is associated with front panel (fp) interface Gig1/0/13 id 13 asic 1 core 0 port 12 mac 0 subport 4 contextid 0 maxspeed DEV_PORT_SPEED_1G gpn 113 active 1 data path:
slot 3 +--ACTIVE SUP--+ | | ---> Supervisor ASIC 1, core 0 on the slot 3 active Supervisor associated with interface Gig1/0/13 | ASIC 1 | | Core 0 | | Asic Port 12 | | | | (Mac 0) | |Nif_Rx NifTx| +--------------+ | | | | SLI MAC 9 | | +---------------+ | SLI_Tx SLI_Rx| ---> Line Card 1. The statistic output below is only for this Line card ASIC | | | ASIC 0 | | Asic Port 12 | | | | (Mac 23) | | NIF_Rx NIF_Tx| +---------------+ Front Port 1/0/13 ^ | | | | | | V ============================================== Nif MAC 23 Inforation: NifRxByteGroupStats: NifTxByteGroupStats: rxBytes 4457854 txBytes 6440428 NifRxByteDestinationGroupStats: NifTxByteDestinationGroupStats: rxUnicastBytes 1163684 txUnicastBytes 1164528 rxMulticastBytes 3294170 txMulticastBytes 5250491 rxBroadcastBytes 0 txBroadcastBytes 25409 NifRxPortStatusGroupStats: NifTxFrameDestinationGroupStats: rxUnicastFrames 18155 txUnicastFrames 18158 rxMulticastFrames 21235 txMulticastFrames 24625 rxBroadcastFrames 0 txBroadcastFrames 51 rxPauseFrames 0 txPauseFrames 0 rxCos0PauseFrames 0 txCos0PauseFrames 0 rxCos1PauseFrames 0 txCos1PauseFrames 0 rxCos2PauseFrames 0 txCos2PauseFrames 0 rxCos3PauseFrames 0 txCos3PauseFrames 0 rxCos4PauseFrames 0 txCos4PauseFrames 0 rxCos5PauseFrames 0 txCos5PauseFrames 0 rxCos6PauseFrames 0 txCos6PauseFrames 0 rxCos7PauseFrames 0 txCos7PauseFrames 0 rxOamProcessedFrames 0 txOamFrames 0 NifRxPortStatusGroupStats: NifTxPortStatusGroupStats: rxCollisionFragments 0 txLateCollisionFrames 0 rxFcsErrorFrames 0 txsystemFcsErrorFrames 0 rxInvalidOversizeFrames 0 txOversizeFrames 0 rxMacOverrunFrames 0 txMacUnderrunFrames 0 rxIpgViolationFrames 0 txDeferredFrames 0 rxOamDroppedFrames 0 txExcessiveDeferralFrames 0 rxSymbolErrorFrames 0 txOkMultipleCollisionFrames 0 rxValidOversizeFrames 0 txOkSingleCollisionFrames 0 rxValidUndersizeFrames 0 goldFramesTruncated 0 NifRxSizeGroupStats: NifTxSizeGroupStats: rx32768toMtuFrames 0 tx32768toMtuFrames 0 rx16384to32767ByteFrames 0 tx16384to32767ByteFrames 0 rx8192to16383ByteFrames 0 tx8192to16383ByteFrames 0 rx4096to8191ByteFrames 0 tx4096to8191ByteFrames 0 rx2048to4095ByteFrames 0 tx2048to4095ByteFrames 0 rx1519to2047ByteFrames 51 tx1519to2047ByteFrames 0 rx1024to1518ByteFrames 15 tx1024to1518ByteFrames 0 rx512to1023ByteFrames 17 tx512to1023ByteFrames 186 rx256to511ByteFrames 3374 tx256to511ByteFrames 9318 rx128to255ByteFrames 6505 tx128to255ByteFrames 6518 rx65to127ByteFrames 11237 tx65to127ByteFrames 8526 rx64ByteFrames 18191 tx64ByteFrames 18286 ============================================== ----------------------------------------------------> Input queue (Igr = Ingress) IgrPacketCounters: EgrPacketCounters: packetsIn 97078 packetsIn 576307 packetsOut 97078 packetsEnqueueFcd_val 0 packetsDropped 0 packetsMarkedForDrop 0 fpsSourcedPadErrorCount 0 padErrorPacketsIn 0 igrSourcedPadErrorCount 0 padErrorPacketsOut 0 ============================================== For aqmRedQueueStats for asic port 12: AqmRedQueueStats: (sum of all queues) ---> Output queue (Agm = Active queue management) acceptByteCnt0 0 acceptFrameCnt0 0 acceptByteCnt1 0 acceptFrameCnt1 0 acceptByteCnt2 6440428 acceptFrameCnt2 42834 dropByteCnt0 0 dropFrameCnt0 0 dropByteCnt1 0 dropFrameCnt1 0 dropByteCnt2 0 dropFrameCnt2 0 outOfSoftBufDropByteCnt 0 outOfSoftBufDropFrameCnt 0 maxQebDropByteCnt 0 maxQebDropFrameCnt 0 ============================================== SLI MAC 9 - SUP 0: ( an ACTIVE sup in slot 3 ) SliTxByteGroupStats: SliRxByteGroupStats: txBytes 4457854 rxBytes 6440428 SLI MAC 1 - SUP 1: SliTxByteGroupStats: SliRxByteGroupStats: txBytes 0 rxBytes 0
Überprüfen Sie den Status der Flusssteuerung unter Line Card-Gesichtspunkten für die Oberfläche an der Vorderseite. Auf diese Weise können Überlastungen an der Schnittstelle identifiziert werden.
C9400#show platform hardware iomd 1/0 flowcontrol status ---> slot 1
Slot 1 - number of ports 48 slot 1: Port 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 IsmF - - - - - - - - - - - - - - - - - - - - - - - - IqmC - - - - - - - - - - - - - - - - - - - - - - - - Port 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 IsmF - - - - - - - - - - - - - - - - - - - - - - - - IqmC - - - - - - - - - - - - - - - - - - - - - - - -
Stellen Sie sicher, dass der Kontrollverkehr aus einer Line Card Stub-ASIC-Perspektive zwischen dem Line Card Stub-ASIC auf der Linecard und dem Supervisor Forwarding ASIC auf dem aktiven Supervisor und dem Standby-Supervisor über die OCI-Schnittstellen fließt.
C9400#show platform hardware iomd 1/0 oci status ---> slot 1 Asic 0, Mac 10, Tx OCI Config 0, OCI Merge FALSE, OCI Enabled, Link Status 0 (UP) Network Port Range 0---47, Local Port Range 0---47 NifRxByteGroupStats: rxBytes 177402572782108 NifTxByteGroupStats: txBytes 141925777717156 Asic 0, Mac 11, Tx OCI Config 0, OCI Merge FALSE, OCI Enabled, Link Status 0 (UP) Network Port Range 0---47, Local Port Range 0---47 NifRxByteGroupStats: rxBytes 963489284 NifTxByteGroupStats: txBytes 770809988
Prüfen Sie, welche Schnittstellen der Linecard zur gleichen Portgruppe gehören, die 8 Gbit/s Bandbreite von der Line Card-Stub-ASIC der Linecard zum Supervisor Forwarding ASIC auf dem aktiven Supervisor nutzt. Jede Portgruppe ist einem der SLI (System Link Interface) auf dem Line Card Stub ASIC zum Supervisor zugeordnet.
C9400#show platform hardware iomd 1/0 portgroups ---> slot 1
Port Interface Status Interface Group Max <-- aggregate bandwidth for 8 ports
Group Bandwith Bandwidth 1 TenGigabitEthernet1/0/1 up 1G 1 TenGigabitEthernet1/0/2 down 1G 1 TenGigabitEthernet1/0/3 admindown 1G 1 TenGigabitEthernet1/0/4 down 1G 1 TenGigabitEthernet1/0/5 down 1G 8G 1 TenGigabitEthernet1/0/6 down 1G 1 TenGigabitEthernet1/0/7 down 1G 1 TenGigabitEthernet1/0/8 down 1G 2 TenGigabitEthernet1/0/9 down 1G 2 TenGigabitEthernet1/0/10 down 1G 2 TenGigabitEthernet1/0/11 down 1G 2 TenGigabitEthernet1/0/12 down 1G 2 TenGigabitEthernet1/0/13 up 1G 8G 2 TenGigabitEthernet1/0/14 down 1G 2 TenGigabitEthernet1/0/15 down 1G 2 TenGigabitEthernet1/0/16 down 1G 3 TenGigabitEthernet1/0/17 down 1G 3 TenGigabitEthernet1/0/18 down 1G 3 TenGigabitEthernet1/0/19 down 1G 3 TenGigabitEthernet1/0/20 down 1G 3 TenGigabitEthernet1/0/21 down 1G 8G 3 TenGigabitEthernet1/0/22 down 1G 3 TenGigabitEthernet1/0/23 down 1G 3 TenGigabitEthernet1/0/24 down 1G 4 TenGigabitEthernet1/0/25 down 1G 4 TenGigabitEthernet1/0/26 down 1G 4 TenGigabitEthernet1/0/27 down 1G 4 TenGigabitEthernet1/0/28 down 1G 4 TenGigabitEthernet1/0/29 down 1G 8G 4 TenGigabitEthernet1/0/30 down 1G 4 TenGigabitEthernet1/0/31 down 1G 4 TenGigabitEthernet1/0/32 down 1G 5 TenGigabitEthernet1/0/33 down 1G 5 TenGigabitEthernet1/0/34 down 1G 5 TenGigabitEthernet1/0/35 down 1G 5 TenGigabitEthernet1/0/36 down 1G 5 TenGigabitEthernet1/0/37 down 1G 8G 5 TenGigabitEthernet1/0/38 down 1G 5 TenGigabitEthernet1/0/39 down 1G 5 TenGigabitEthernet1/0/40 down 1G 6 TenGigabitEthernet1/0/41 down 1G 6 TenGigabitEthernet1/0/42 down 1G 6 TenGigabitEthernet1/0/43 down 1G 6 TenGigabitEthernet1/0/44 down 1G 6 TenGigabitEthernet1/0/45 down 1G 8G 6 TenGigabitEthernet1/0/46 down 1G 6 TenGigabitEthernet1/0/47 down 1G 6 TenGigabitEthernet1/0/48 up 1G
Überarbeitung | Veröffentlichungsdatum | Kommentare |
---|---|---|
1.0 |
23-Jun-2022 |
Erstveröffentlichung |